1) curved pipe conveying fluid
输流曲管
1.
Considering the environmental damping, this paper investigated the chaotic vibrations of a Kelvin-Voigt type curved pipe conveying fluid subjected to motion-limiting constraint.
考虑环境阻尼因素的影响,研究了具有运动约束作用Kelvin-Voigt型输流曲管的混沌运动现象。
2) curved pipes conveying fluid
输液曲管
1.
The vibration equations and finite element analysis model of the curved pipes conveying fluid are constructed and the dynamics of curved pipes under the boundary conditions of cantilever pipe are investigated also.
针对悬臂的边界条件,建立了在流体作用下输液曲管的振动方程及有限元分析模型,并研究了曲管的振动特性。
2.
Analyzing the stability of curved pipes conveying fluid by high precise direct integration method (HPD) is a new attempt.
将精细积分法用于分析输液曲管的动力稳定性是一个新的尝试 。
3) ureter distortion
输尿管扭曲
1.
Technique of ureteroscopy for ureter distortion;
输尿管扭曲时的输尿管镜进镜体会
4) bend stream-tube
弯曲流管
1.
In this method bend stream-tube is used to the single stream-tube.
该方法是以朱典明和谷口中所用方法为基础,用“弯曲流管”代替“单向流管”,将摆线推进器抽象为斜向作用盘,在斜向作用盘的作用下,产生斜向诱导速度,使水流方向发生改变。
5) pipe conveying fluid
输流管道
1.
Stability of pipe conveying fluid under axial load;
轴向载荷输流管道的稳定性分析
2.
Research on natural frequency of pinned-pinned pipe conveying fluid;
两端铰支输流管道固有频率的研究
3.
Based on the stress anylysis of element,the vibration differential equation of the pipe conveying fluid on elastic foundations is derived,the mode and the nature frequency of the pipe are calculaed by variable-separating method and numerical method.
根据对单元体受力分析推导出了弹性地基输流管道的振动微分方程,应用分离变量法和数值方法计算了弹性地基输流管道在两端铰支情况下的模态和固有频率。
6) pipes conveying fluid
输流管道
1.
An effective solution to dynamic response of pipes conveying fluid;
求解输流管道动态响应问题的一种有效方法
2.
Internal resonance conditions of supported pipes conveying fluid
两端支承输流管道内共振条件分析
3.
The parametric resonance of clamped-pinned pipes conveying fluid was investigated experimentally.
用实验方法研究了一端固定、一端铰支输流管道在脉动内流作用下的参数共振问题。
补充资料：夹布输水胶管
分子式：
CAS号：
性质： 夹布胶管的一种。产品结构和制造工艺与普通夹布胶管相同。内层胶一般用天然、丁苯、顺丁等橡胶及其并用胶料，外层胶常掺用部分氯丁橡胶以提高其耐老化性能。管体较轻便、柔软，适用工作压力为0.3～0.7MPa，内径范围为扎3～152mm。主要用于输送水及中性液体。
CAS号：
性质： 夹布胶管的一种。产品结构和制造工艺与普通夹布胶管相同。内层胶一般用天然、丁苯、顺丁等橡胶及其并用胶料，外层胶常掺用部分氯丁橡胶以提高其耐老化性能。管体较轻便、柔软，适用工作压力为0.3～0.7MPa，内径范围为扎3～152mm。主要用于输送水及中性液体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条