1) pressure vessel nozzle
压力容器接管
1.
Mechanics characteristic and fracture behavior of pressure vessel nozzles can simulated and we can measure fatigue rate of nozzle cracks at pressure vessel by testing of SCT samples.
应力应变测定结果和断裂试验证明SCT试样能够较好模拟压力容器接管等高应变梯度区的力学特征和断裂特征。
2) pressure vessel nozzle
压力容器接管区
1.
In view of the characteristic of high strain gradients at the junction between the pressure vessel and the nozzle, based on the simulating shape plate of the pressure vessel nozzle, photoelastic analysis of four types of special shape plates is carried out and the finite element models are established.
针对压力容器接管区高峰应变、高应变剃度、强大的弹性约束和应变峰值呈单向应力状态的特征,在压力容器接管模拟试板的基础上,对多种孔径的异型板应力应变场进行光弹性试验研究并建立有限元模型,分别就不带裂纹和带有裂纹的异型板进行应力分析。
2.
According to high strain gradients characteristic at the junction between pressure vessel and nozzle,based on simulating shape plate of pressure vessel nozzle,FEM s models are established for two types of special shape plates.
针对压力容器接管区高峰应变的特征 ,在压力容器接管模拟试板的基础上 ,对多种孔径的异型板应力应变场建立有限元模型 ,分别就不带裂纹和带有裂纹的异型板进行应力分析。
3) pressure
压力
1.
Effects of compounds with metal element and pressure on the combustion characteristics of mixed industrial sludge;
含金属元素化合物和压力对工业污泥燃烧特性的影响
2.
Determination of Pressure and Temperature in Oil Field Gas Condensation Separation Method;
油田气冷凝分离法中压力和温度的确定
3.
Analysis of pressure dynamic curve on fractured horizontal well;
压裂水平井压力动态曲线分析
4) press
压力
1.
And the melt flux was in di- rect proportion with press fall.
PET熔体流动类型经分析判断为牛顿流动,熔体流量与压力降成正比关系。
2.
According to the weight of the head(of the frame) and by calculating as well,gear pumps are chosen whose discharge is 45 litres per minute and whose pressure is 8 MPa,and also four jacks are needed,eac.
移挪重达18 t的架头,拟采用全液压系统的千斤顶,根据架头的重量,通过计算,选择了流量为45 L/min,压力为8 MPa的齿轮泵,4根单根最大推力为100 kN的千斤顶,由7。
3.
The effective factors include the type,granularity and rigidity of abrasive,process press as well as process time.
本文借助正交设计方法研究了磨料水射流用于光整加工时的工艺参数 ,包括磨料的粒度、种类、硬度以及工作压力、加工时间等对表面粗糙度和表面去除量的影响 。
5) Tension
压力
1.
A strategic approach to the tensions affecting the mental health of the teaching staff;
影响教师心理健康的压力源及应付策略
2.
The tension of "Self-Identity" is the force that restricts the developing direction in order to accomplish the potential self.
"自我认同"的动力是推动"自我认同"趋向和谐一致的力;"自我认同"的阻力是阻碍自我在一致性进程中发展的力;"自我认同"压力是规制认同发展方向实现可能自我的力。
6) stress
压力
1.
Correlation between the mental stress and the coping styles among the parents of cerebral palsy children;
脑瘫患儿父母心理压力及其应对方式的相关性研究
2.
College students social anxiety associated with stress and mental health;
大学生社交焦虑与压力和心理健康的关系
3.
A Comparative Study on the Job Stressor and Degree of Stress among Head Nurses and Clinical Nurses;
护士长和临床护士工作压力源与压力程度对比研究
参考词条
补充资料：锅炉、压力容器、压力管道及特种设备定期检验
锅炉、压力容器、压力管道及特种设备定期检验
periodic inspection of boilers, pressure vessels, pressure piping and special equipment
guolu YOli侧飞扣1 YOli gLJal对印ji tez陌叩劝以拍1 dingqi】，on四n锅炉、压力容器、压力管道及特种设备定期检验(peri诫c inspectionof城le。，p~切reves-Sels，p~二piPing ands衅过闪uiplr屺nt)为保证设备的安全使用，规定设备必须按一定周期进行法定的、强制性的检验。定期检验由政府设立的检验所、使用单位或行业检验站进行。检验单位及检验人员必须具有与所检设备相适应的资格。设备使用单位应该建立定期检验制度，做好检验计划，按时向检验单位提出申请。检验单位应该保证及时进行检验，检验按有关检验规则进行。检验时，设备使用单位应做好配合工作，提供必要的运行资料。检验完毕，检验单位要出具检验报告，对设备能否使用，要作出明确结论。如设备有缺陷，要提出是否修理、监护使用和报废的处理意见。锅炉压力容器安全监察机构根据检验机构的报告，发使用许可证书。有缺陷的，责令使用单位修理，修理后检验仍不符合安全要求的，则通知报废。使用单位逾期不进行定期检验，锅炉压力容器安全监察机构有权停止其设备运行。(陈亦惠)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。