1) Overlying soil layer
上覆土体
2) overlaying soil
上覆土层
1.
Simulate the rupture process of the overlaying soil with hard interlayer;
有硬夹层的上覆土层破裂过程的数值模拟
2.
In this paper, the rupture characteristics of the overlaying soil with soft interlayer were studied by plane-strain finite element method.
采用平面应变有限元法,研究了地震断层错动时有软夹层的基岩上覆土层的破裂特征。
3.
The influences of the rupture mode,the overlaying soil thickness and stiffness to the buried pipeline is analyzed by a 3D soil-and-pipe nonlinear ANSYS finite element model.
利用ANSYS程序建立的三维管土非线性有限元模型,计算分析了断层基岩上覆土层的变形破裂形式、土层厚度及土层土质的硬度对埋地管道的影响。
3) overburden
[英][,əʊvə'bɜ:dn] [美]['ovɚ'bɝdṇ]
上覆土层
1.
Through shaking table test, in this paper the rule of the underground structure reaction to earthquake is summarized and the distortion of the structure and the mechanism of wreck are analyzed, especially the effect of overburden and the vertical earthquake to underground structure are studied.
文章通过振动台试验,总结了地下结构地震反应规律,分析地下结构的变形机制,并重点分析上覆土层和竖向荷载对地下结构动力性态的影响。
4) fully saturated halfspace with an elastic superstratum
上覆弹性板饱和土体
5) overlying water
上覆水体
1.
Effects of chemical agents on the overlying water during in-situ sediment treatment;
底泥原地稳定化过程中药剂对上覆水体的影响
2.
By lab-scale experiments,in the iron-added reactor and a contrast reactor,the changes of TP and pH in overlying water,changes of WSP,various phosphorus according to Golterman and TP in the sediments have shown that cheap and easily-gotten iron scraps can be used to reduce the concentration of soluble phosphorus in scenic water from 0.
实验考察了加铁反应器与空白对照反应器中上覆水体总磷浓度和pH的变化,并分析了底泥中水溶性磷、G法各种形态提取磷以及全磷含量变化。
3.
We examined self- purifying coefficient- BOD and COD reduction coefficient in overlying water at the presence and absence of dredging sediment as well as comparison the dredging effectiveness.
分别在已疏浚和未疏浚河道底泥的影响下,考察了上覆水体自净系数———BOD减少速度系数和COD减少速度系数,以比较疏浚对于改善水体自净能力的效果。
补充资料：奥氏体-贝氏体球铁
分子式：
CAS号：
性质：又叫奥-贝球铁。基体组织为奥氏体加贝氏体组织的球墨铸铁。这类球铁硅含量一般在1.4%～3.8%。含锰量小于0.5%，与普通球铁比较硅偏高、锰偏低。通过调节化学成分与热处理获得理想的奥-贝球铁的基体组织为针状贝氏体或无碳贝氏体一富碳奥氏体。这类球铁具有优良的综合机械性能、强度高、耐磨性好、韧性好、特别是有高的缺口韧性，可代替钢，用于制作重要受力结构件，如曲轴、齿轮、凸轮轴等。
CAS号：
性质：又叫奥-贝球铁。基体组织为奥氏体加贝氏体组织的球墨铸铁。这类球铁硅含量一般在1.4%～3.8%。含锰量小于0.5%，与普通球铁比较硅偏高、锰偏低。通过调节化学成分与热处理获得理想的奥-贝球铁的基体组织为针状贝氏体或无碳贝氏体一富碳奥氏体。这类球铁具有优良的综合机械性能、强度高、耐磨性好、韧性好、特别是有高的缺口韧性，可代替钢，用于制作重要受力结构件，如曲轴、齿轮、凸轮轴等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条