1) biaxial flexural member
双向受弯构件
1.
As is known to all,there are many biaxial flexural members on the civil engineering.
土木建筑工程中有许多双向受弯构件,如承受风荷载的墙梁、框架的边梁等。
2) doubly reinforced flexural member
双筋受弯构件
1.
On the normal section design of doubly reinforced flexural members,tension members with large eccentricity and compression members with large eccentricity,the balanced section is designed in general,of which the equifinal depth of compression zone equals to the balanced depth of compression zone.
钢筋混凝土基本构件设计中,有两个问题值得商榷:(1)双筋受弯构件、大偏心受拉构件以及大偏心受压构件的正截面设计问题中的常见做法是在基于截面等效受压区高度等于界限高度时截面纵筋总配筋量最少的认识下将截面设计成界限截面,但根据推导,界限截面并不是纵筋总配筋量最少的条件,而且设计成界限截面还会丧失截面的延性,降低构件的可靠度。
3) bi-axial bending moment
双向压弯构件
1.
Cross-sectional strength of high-strength concrete-filled RHS steel tubes subjected to axial compression and bi-axial bending moment;
矩形钢管高强混凝土双向压弯构件截面强度
4) biaxial bending
双向受弯
1.
Design technique of steel beam under biaxial bending;
双向受弯型钢梁设计技巧
2.
Calculation of the shear capacity of reinforced concrete beams under biaxial bending
双向受弯钢筋混凝土梁受剪承载力计算
3.
members with web reinforcement subject to biaxial concentrated load,the method of equal effective shuttle-shape section was adopted,the restrained beams under biaxial bending is turning into the restrained beams under axial bending.
在13根集中荷载作用下钢筋砼双向受弯约束梁斜截面抗剪试验研究的基础上,采用等效梭形截面法,将双向受弯约束梁转化为单向受弯约束梁,并推出集中荷载作用下钢筋混凝土双向受弯约束梁斜截面抗剪强度的计算方法。
5) flexural member
受弯构件
1.
Calculation of carrying capacity of the normal section of a RC flexural member with round section;
钢筋混凝土圆截面受弯构件正截面承载力计算
2.
Simplified method of reinforcing the grouted concrete flexural members;
现浇钢筋混凝土受弯构件加固补强简易方法
3.
Simplied calculation to the minimum reinforcement ratio of flexural members to be content crack;
满足裂缝要求的受弯构件最小配筋率的简化计算
6) flexural members
受弯构件
1.
Control of crack width in reinforced concrete flexural members;
钢筋混凝土受弯构件裂缝宽度控制
2.
Deflection of preflex prestressed concrete flexural members;
预弯预应力混凝土受弯构件的挠度计算
3.
Experimental study on behavior of cold-formed steel flexural members with thickness less than 2mm
壁厚2mm以下冷弯薄壁型钢受弯构件性能试验研究
补充资料：长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条