1) condenser pipes
凝汽器管
1.
The water quality at Xuzhou Section of Great Canal and the physical chemistry properties of 316L stainless steel condenser pipes are described.
简述了运河徐州段的水质状况和316L不锈钢凝汽器管的物化性能,给出了一种以PBTCA、POCA、PESA、PAPEMP和T-225为主要成分的复合阻垢剂,用极限碳酸盐硬度法和动态模拟法试验,结果表明:在按补水计投药质量浓度为10 mg/L时系统可在k=3。
2) condenser copper tube
凝汽器铜管
1.
Example analysis of residual carbon film induced corrosion on condenser copper tube;
凝汽器铜管残碳膜腐蚀实例分析
2.
The corrosion resistance of the condenser copper tube surface treated by different methods was tested and studied using electro-chemical testing and alternating current resistance technique.
用电化学实验及交流阻抗技术探讨了采用不同方法对凝汽器铜管表面处理后的耐蚀性 ,证明化学镀Ni-P合金后铜的耐蚀性提高。
3.
The corrosion and protection of condenser copper tubes has always been a problem people are keenly concerned with but for which there still lacks a satisfactory solution.
凝汽器铜管的腐蚀与防护一直是令人关心但又未解决好的问题 ,由于凝汽器运行条件复杂、材质众多及冷却水质的不断恶化 ,导致其腐蚀形式多种多样。
3) condenser tubes
凝汽器铜管
1.
Application of on-line corrosion monitoring technology on the condenser tubes in thermal power plants;
腐蚀在线监测技术在火电厂凝汽器铜管上的应用
2.
It is the key step to process the surface of the condenser tubes to produce FeSO 4 membrane, but it is often neglected.
凝汽器铜管硫酸亚铁成膜前铜管表面的预处理是保证成膜质量的重要前提，但也是最容易被忽视的地方。
4) condenser tube
凝汽器铜管
1.
An evaluation method for corrosion-resistance of condenser tubes;
凝汽器铜管耐蚀性评定方法
5) condenser tube materials
凝汽器管材
1.
The research and development history and the application status quo of condenser tube materials(copper alloy tube,tita-nium tube,stainless steel tube)commonly used in power plants in China are retrospected and summarized,and the application mar-ket prospect of various condenser tube materials is briefly analyzed.
对我国发电厂常用凝汽器管材(铜合金管、钛管、不锈钢管)的研究发展历史及应用现状进行回顾性综述,并对各种凝汽器管材的应用市场前景进行简要分析。
6) condenser brass pipe
凝汽器铜管
1.
For the leakage often occured on condenser brass pipe of Hanchuan Power Plant,using differential inner insert detecting coil the on line multi frequency eddy current check technology effectively restrains interferance source signal from support board,etc,improves measuring sensitivity and the measuring result gets more reliable.
针对汉川电厂凝汽器铜管在运行中多次发生泄漏 ,利用差分内插式检测线圈 ,通过多频涡流检测技术对凝汽器进行涡流在役检测 ,有效地抑制了支撑板等干扰源信号 ,提高了检测灵敏度 ,使得检测结果更可靠。
补充资料：动力机械：凝汽器
使驱动汽轮机作功后排出的蒸汽变成凝结水的热交换设备。又称冷凝器。蒸汽在汽轮机内完成一个膨胀过程后﹐在凝结过程中﹐排汽体积急剧缩小﹐原来被蒸汽充满的空间形成了高度真空。凝结水则通过凝结水泵经给水加热器﹑给水泵等输送进锅炉﹐从而保证整个热力循环的连续进行。为防止凝结水中含氧量增加而引起管道腐蚀﹐现代大容量汽轮机的凝汽器内还设有真空除氧器。
凝汽器分为表面式和混合式(用于轻式冷却塔)两种。混合式凝汽器内排汽直接与冷却水接触﹐会造成水质污染﹐因而电厂汽轮机很少使用。表面式凝汽器内排汽不直接与水或其它冷却介质接触﹐蒸汽在冷却器壁面上凝结成水。表面式凝汽器可采用水冷和空冷。用水冷的表面式凝汽器为保持高度真空和良好传热效果﹐常配有抽气设备﹐不断将漏入凝汽器的不凝结气体和空气抽出。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条