说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 带压痕压型钢板
1)  profiled steel sheeting with indentation
带压痕压型钢板
2)  profiled steel sheeting
压型钢板
1.
Type design and sectional characteristic calculation of closed profiled steel sheeting;
闭口型压型钢板板型设计和截面特性计算
2.
Construction technology of profiled steel sheeting composite slab;
压型钢板复合楼板的施工技术
3.
This paper analyses deformation rules and control capability of profiled steel sheeting and stiffened elements concretely,and bring forward optimization measure of the board of middle case,which would of.
分析了中箱体板结构分别采用压型钢板和平板加劲的变形规律及控制变形能力,提出了中箱体箱板的结构优化途径,为大型袋式除尘器工程设计和箱板优化提供了快速且经济的研究手段。
3)  profiled sheet
压型钢板
1.
The construction methods of a new-slab are introduced which is made of profiled sheet and OSB board using in an extension project.
介绍某扩建工程中新型楼板——压型钢板+OSB板的建筑做法,剖析该新型楼板的施工过程及施工工艺,同时提出解决此类新型楼板施工过程中一些常遇难题的技术方法,为多层钢框架压型钢板+OSB板新型楼板的施工提供借鉴依据。
2.
In the gabled frames,the profiled sheet that is used as the roof and the wall can also resist the shear force in their own plane.
门式刚架中,压型钢板在做屋面维护结构的同时,还承受维护结构平面内的荷载。
3.
The stressed skin diaphragm is a structural system that considers profiled sheet of roof and metope working together with framework and purline.
受力蒙皮是考虑房屋屋面、墙面的压型钢板与框架、檩条进行可靠连接而共同工作的结构体系。
4)  steel deck
压型钢板
1.
The load carrying capacities of steel deck concrete composite slabs are governed by the longitudinal shear strength.
压型钢板-混凝土组合楼板的承载能力受楼板叠合面的纵向抗剪能力控制。
2.
In this paper, for a new closed-section steel deck-concrete composite slab, a test program has been carried out for bending capacity, shear capacity, fire-resistance capacity.
压型钢板-混凝土组合楼板是一种十分合理的结构形式,能充分发挥两种不同材料的受力性能,施工速度快,延性好,抗震性能优越。
3.
The steel deck-concrete composite slab is one kind of composite structure.
压型钢板-混凝土组合楼板是一种组合结构,能充分利用钢材的耐拉和混凝土的耐压特性。
5)  profiled sheeting
压型钢板
1.
In order to study the plastic behavior of continuous composite beams with profiled sheeting, experiments have been conducted on three specimens of two span continuous composite beams with profiled sheeting.
为了研究钢压型钢板混凝土连续组合梁的受力性能,对 3根两跨钢压型钢板混凝土组合梁进行了试验研究。
2.
In order to study the performance of composite beams under negative bending,and to make preparation for continuing research on continuous composite beams,experiments on composite beams with profiled sheeting are conducted.
为了解组合梁在负弯矩作用下的受力性能 ,并为有关连续组合梁的进一步研究提供依据 ,对压型钢板组合梁在负弯矩作用下的抗弯性能进行了试验研究。
3.
Profiled sheeting concrete composite slab has been extensively applied to engineering recently because of its big rigidity, good ductility, ease of construction, and economic returns, etc.
压型钢板-混凝土组合楼板因具有刚度大、延性好、施工方便、经济效益优越等特点,在实际工程中的应用越来越广泛。
6)  Profiled steel sheet
压型钢板
1.
Technical and economic analysis of replacing profiled steel sheet with reinforced truss;
采用钢筋桁架替代压型钢板的技术经济分析
2.
Experimental study on mechanical behavior of profiled steel sheet-bamboo plywood composite slabs;
压型钢板-竹胶板组合楼板的力学性能试验研究
3.
Analysis and prevention of composite profiled steel sheeting roof common disease
复合压型钢板屋面通病的分析与预防
补充资料:压痕


压痕
rolled pit

yahen压痕(r olled pit)钢材表面缺陷之一,系产品表面上被外物压成的局部凹坑,呈周期性单个或多个断续分布。一般产品表面允许有深度不超过标准规定的压痕。 产生原因是:(1)周期性压痕是由于成品孔或成品前孔、矫直辊、出口辊动导板(见导板)、导辊等粘有凸起物;(2)异物掉在轧件上,经轧后脱落;(3)产品在运送、保管过程中与硬物碰压或产品本身相互格压。 防止和消除办法有:(l)生产中定期检查轧件、轧糟、矫直辊和辊动导板,发现问题及时处理;(2)轧制时防止异物掉在轧件上;(3)吊运产品要平稳,产品包装要平齐,捆扎要牢固,堆放底脚要垫平。 (刘肾才)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条