1) auto-cascade
自然复叠
1.
Thermodynamic calculation and analysis on auto-cascade heat pump system
自然复叠式热泵循环系统热力计算与分析
2.
Concentration Optimization of R134a/R123 in Auto-cascade Heat Pump Systems
R134a/R123自然复叠式热泵系统浓度配比分析
3.
The chamber refrigeration system use Auto-cascade refrigerating cycle and R22 / R23 as the zeotropic mixture refrigerant to obtain low-temperature -55 °C high pressure airs.
试验箱制冷系统设计采用自然复叠制冷循环,使用R22/R23混合工质来获取—55℃高压气体。
2) autocascade
自然复叠
1.
According to the simulation results of -40℃ freezer with autocascade refrigeration system using zeotropic refrigerant mixture of R744/R717, the feasibility of this system on how to deal with temperature change of cooling media and avoid superheat of compressor is investigated after analyzing system characteristics under various operating conditions.
针对非共沸环保混合制冷剂(R744/R717)自然复叠制冷-40℃冷柜模拟研究结果,在进一步探讨了该系统的变工况特性的基础上,提出应对冷却介质温度发生变化的系统控制方案及应对压缩机过热的系统改进方案。
2.
Based on related program, the tunning parameters of classical cascade cycle and that of autocascade cycle on different conditions ate calculated,and then the running characteristics of the two cycles are compared,which may help the further research on autocascade cycle.
本文根据相关程序,计算了不同条件下R23/R134a经典复叠循环和自然复叠循环的运行参数,分析比较这两个循环的运行特性,以期对于深入研究自然复叠有所裨益。
3) Autocascades system
自然复叠系统
4) natural cascade refrigeration
自然复叠制冷
1.
The simulation model of NH3/CO2 natural cascade refrigeration system was est-ablished.
建立了NH3/CO2自然复叠制冷系统的仿真模型。
5) auto-refrigeration cascade system
自然复叠制冷系统
1.
A simulation program based on NIST REFPROP is designed in accordance with an auto-refrigeration cascade system using R134a/R23 mixing refrigerant.
针对使用R134a/R23混合制冷剂的自然复叠制冷系统,编制了基于NIST REFPROP的仿真程序。
2.
An auto-refrigeration cascade system which using R134a/R23 mixing refrigerant is designed,and the property of this system is studied.
仿真设计了一种使用R134a/R23混合制冷剂的自然复叠制冷系统,对该系统的特性进行了分析。
3.
Three type auto-refrigeration cascade systems are designed.
对使用R134a/R23混合制冷剂的三种常用自然复叠制冷系统进行了设计,比较分析了这三种系统的蒸发温度、COP、压缩机排气温度等运行参数特性,并研究了在制冷剂配比改变、蒸发温度改变时三种系统的变化特性。
6) Auto-cascade
自行复叠
1.
Performance Study on Auto-cascade Absorption Refrigeration Cycle Using R32+R134a/DMF as Working Pairs;
以R32+R134a/DMF作为工质的自行复叠吸收制冷循环性能分析
2.
Study on an Auto-cascade Absorption Refrigeration Cycle;
自行复叠吸收制冷循环研究
3.
The conception of lowest refrigeration temperature is brought forward on absorption refrigeration cycle, then, effects of different factor is studied on characteristics of an auto-cascade absorption refrigeration (ACAR) cycle.
提出了吸收制冷循环的极限制冷温度概念,以自行复叠吸收制冷(ACAR)循环为例分析了多种因素对极限制冷温度和COP等性能参数的影响。
补充资料：复叠
1.见"复迭"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条