1) whole profile
完整齿廓
1.
To make the transition curve in the process of gear modeling he more reasonable,the parameterized 3D model of involute cylindrical spur gears with whole profile was made with Pro/Engineer software,based on the study of equations of the dual-arc rack cut- ter s profile curves and the cut gear s tooth profile curves.
为了使齿轮建模时过渡曲线部分更符合工程实际,在对双圆弧齿条型刀具轮廓曲线方程和齿轮的廓线方程研究的基础上,利用Pro/Engineer软件建立了可变位的渐开线完整齿廓直齿圆柱齿轮的三维参数化模型,并对齿廊曲线连续性进行了分析。
2) profile
[英]['prəʊfaɪl] [美]['profaɪl]
齿廓
1.
To create involute profile of gear by using the Auto CAD;
模拟加工过程中生成渐开线齿轮齿廓的方法
2.
To Create Involute Profile of Gear by Using AutoCAD;
用AutoCAD生成渐开线齿轮齿廓的方法
3.
In this system,the geometric figure of the enveloping tooth profile is generated.
通过滚齿加工过程图形仿真系统可以精确地获得齿廓曲线。
3) tooth profiles
齿廓
1.
In this paper, taking the equdistant curve of short spoke epicycloid as original tooth profiles (external gear), the conjugate internal gear tooth profiles (quasi-cycloid) and the pinion cutter tooth for cutting the internal gear are obtained.
本文以短幅外摆线的等距线为原始齿廓(外齿轮),求取了与之共轭的内齿轮齿形(准摆线齿形)及切削这种内齿轮的插齿刀齿形,并寻求了用三圆弧替代插齿刀齿形的方法。
2.
A mathematical model of parametric equations of theoretical and practical tooth profiles is established.
提出并分析了偏心轮推杆行星传动的传动原理 ,建立了理论齿廓和实际齿廓方程 ;证明了定传动比 ,采用不同的安装方式 ,可得到 6种不同的传动
3.
The inefficient single wave harmonic drive caused by interference of tooth profiles has not been solved by exact theoretical analvsis;Screw is used in the paper as mathematical tool.
齿廓干涉引起单波谐波传动失效的问题迄今没有精确的理论分析方法。
4) Gear Profile
齿廓
1.
This paper introduces a method of fast and precise generation of involute gear profile in AutoCAD,based on the powerful drawing capacity of AutoCAD and fast tabulating and calculation of Excel.
本文基于AutoCAD强大的绘图功能,结合Excel快速制表与计算功能,给出AutoCAD中快速、精确生成齿廓渐开线的方法。
5) Tooth profile
齿廓
1.
Desingnning tooth profile and "big circular arc" fitting on the "circle tooth profile-conjugated curve" internal gear pump;
“圆齿-共轭曲线”内啮合齿轮泵的齿廓设计和大圆弧拟合
2.
CAD of tooth profile of cycloid gear template;
销齿摆线齿轮样板齿廓的计算机辅助设计
3.
Forming of the rotor tooth profile of cycloid rotor pump;
摆线转子泵转子齿廓的形成
6) Gear outline
齿廓
1.
This paper introduces a new simple method to draw involute gear outline using EB.
介绍了利用电子图板(EB)快速绘制齿轮齿廓的简便方法,该绘制方法充分利用了电子图板的公式曲线功能,使比较困难的手工绘制变得简单、实用,解决了传统手工绘制误差较大、精度不高的问题。
2.
The way to design gear outline is also given.
摆动活齿传动是活齿传动中重要的一种，对摆动活齿传动机构的传动原理、运动分析方法进行了研究，并给出了齿廓曲线综合的具体方法。
补充资料：廓廓
1.安定貌。 2.辽阔貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条