1) ) skew incremental(launching
斜交顶推
2) bulldozer tilt brace
推土机倾斜顶杆
3) tilt mandril
斜顶
1.
According to the structure of the product, the unique asymmetric tilt mandril of the core side-pulling mechanism and the cool- ing system made up of channel and deep cavity are designed, which increases the ability of cooling and ensures that the product can be successfully taken out from the injection mould.
根据产品的结构,设计了独特的横向斜错位非对称斜顶侧向抽芯机构和深水孔加冷却水道的冷却系统,提高了模具的冷却效果,确保了产品顺利脱模。
2.
According to the structure of the product,the unique tilt mandril and side-slug of the core side-pulling mechanism were designed,which ensured that the product could be taken out from the injection mould.
根据塑料件的结构,重点设计了两凹槽的斜顶侧向抽芯机构和斜导柱滑块抽芯机构,保证了塑料件的顺利脱模。
3.
In order to achieve the four-direction pulling core,the special tilt mandril was designed according to the product structure,which simplized the injection mould structure.
根据产品结构,应用斜顶机构实现了产品四向侧抽芯,简化了模具结构,降低了制造成本。
4) lifter
[英]['liftə] [美]['lɪftɚ]
斜顶
1.
Analyzed the processing characteristics of product,determined the gate location by simulating the molding process of clutch through MoldFlow,designed the lifter structure and two-parting plane mold structure,descripted the mold\'s work process.
模具为三板式点浇口结构,采用成型斜顶杆方式实现了模具抽芯要求,并完成了模具结构设计。
5) angle ejector
斜顶
1.
Introduced a inner ejection pin in angle ejector structure that prevent product pulling pulling injury and displacement.
介绍了一种从斜顶内顶杆顶出,防止产品拉伤、位移的基本结构。
2.
By process analysis of the complex angle ejector,proposed a way for manufacturec omplex angle ejector via adjusting the machine order for mold parts,put forward a manufacturep rocess for angle ejector,solved the manufacture problem concerning a unsymmetrical anglee jector with different slope in each side,and as a result,realized efficient manufacture of anglee jector.
通过对复杂斜顶零件的加工工艺研究,提出了合理安排模具零件的加工顺序及加工复杂斜顶零件的方法,制定了斜顶零件的加工工艺过程,解决了四面具有斜度的不对称斜顶零件的加工问题,实现斜顶零件高效、快速地加工。
6) incremental launching
顶推
1.
The sunlight thermal gradient of the steel box girder and the deformation of the last girder in incremental launching construction of Hangzhou Jiangdong Bridge
杭州江东大桥钢箱梁的日照温度梯度及顶推过程中末段梁的变形
2.
The incremental launching of box culvert tunneling under Ci-Lai railway is the critical control engineering of the relocation project in Xintai urban area in 205 national road.
下穿磁莱铁路的顶推箱涵,是205国道新泰城区改线工程的关键性控制工程,通过广泛深入的调查研究,精心设计、科学监测、合理施工,在顶进施工过程中采用了一系列行之有效的措施,实现了顶进施工的安全可靠,保证了磁莱铁路交通的不中断运行。
3.
The article,taking the incremental launching construction of one bridge as an example,introduces in detail the project,preparation and process of beam placement,proposes principles in the control of beam placement,which may provide reference for beam placement of bridges of the same kind.
文章以采用顶推法施工的某大桥为工程背景,详细介绍了落梁方案、落梁前的准备及落梁过程,提出了落梁控制原则,对同类桥梁的落梁施工具有重要的借鉴价值。
补充资料：带束斜交轮胎
分子式：
CAS号：
性质：又称半子午线轮胎。指以带束层箍紧斜交轮胎胎体的充气轮胎。其带束层帘线排列与子午线轮胎接近，轮胎使用性能介于斜交轮胎和子午线轮胎之间，其生产方法基本上与斜交轮胎相同。这种轮胎世界上只有美国生产，作为由斜交轮胎向子午线轮胎过渡的产物，随着子午线轮胎的发展，这种轮胎将逐渐被淘汰。
CAS号：
性质：又称半子午线轮胎。指以带束层箍紧斜交轮胎胎体的充气轮胎。其带束层帘线排列与子午线轮胎接近，轮胎使用性能介于斜交轮胎和子午线轮胎之间，其生产方法基本上与斜交轮胎相同。这种轮胎世界上只有美国生产，作为由斜交轮胎向子午线轮胎过渡的产物，随着子午线轮胎的发展，这种轮胎将逐渐被淘汰。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条