说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 最大往返剪切作用面
1)  the maximum cyclic shear surface
最大往返剪切作用面
1.
The reference[1] suggested the failure stress condition on the maximum cyclic shear surface for saturated sands in 1980s.
基于文献[1]提出的最大往返剪切作用面上的液化应力条件和粉煤灰的动三轴试验数据,运用回归分析方法拟合曲线及相关参数建立了粉煤灰的破坏应力条件,并应用F检验法对参数的回归效果进行了检验,检验结果表明参数的回归效果高度显著。
2.
Through a series of dynamic triaxial tests,the failure stress condition on the maximum cyclic shear surface was discussed.
通过一系列的动三轴试验,探讨以应变为破坏标准的最大往返剪切作用面上的破坏应力条件。
2)  maximum shear stress plane
最大剪应力作用面
3)  maximum bed shear stress
最大床面剪切力
4)  shear action
剪切作用
1.
In order to investigate the effect of shear on rheological property of waxy crude,the viscoelastic parameters(energy storage modulus and energy consumption modulus) of Daqing crude oil which undergoes different shear actions and the same cooling history are measured using a stress-controlled rheometer with high precision.
为了探索剪切作用对含蜡原油流变性的影响规律,使用高精度的控制应力流变仪测量经历相同降温和不同剪切作用的大庆原油黏弹性参数(储能模量和耗能模量))。
2.
During pipeline transportation, depressant-treated crude oil is inevitably influenced by the shear action from pumps and pipes.
在管输过程中,添加降凝剂的原油必然受到泵剪切和管流剪切作用。
3.
In order to study the blocking characteristics of flow foams in porous medium, affects of foam quality, shear action, permeability of porous medium, temperature, oil saturation were studied.
利用多孔介质中的流动特性试验,研究了泡沫干度(通过改变液相流速实现)、剪切作用(通过改变气相流速实现)、温度、多孔介质渗透率、含油饱和度等因素对多孔介质中流动泡沫封堵性能的影响及其作用原理,在此基础上对多孔介质中泡沫的封堵机理进行了分析。
5)  shearing [英]['ʃiəriŋ]  [美]['ʃɪrɪŋ]
剪切作用
1.
The future researching relates formation and evolution of fluid to orogeny,deformation,subduction,shearing and mantle-crust convection, earthquake and volca.
近十年来及未来的研究热点主要表现在将流体的形成和演化与造山作用、构造变形、剪切作用、板块俯冲、壳幔对流等联系起来,俯冲带中的流体、剪切带中的流体、盆地卤水、海底热泉、大陆热泉、成矿流体油气形成及运移、地壳流体与地震火山活动等,对地质流体的成因、特征及其地质作用过程有了更深刻的理解。
2.
Effect of Shearing on the Microcellular Foaming Process of Polymer
分别运用有螺纹转子系统和无螺纹转子系统进行试验,并分析研究剪切作用对聚合物微孔发泡成型过程3个阶段的影响。
6)  shearing action
剪切作用
1.
The influence of shearing action on the gelation of partially hydrolyzed polyacrylamide (HPAM) with aluminum citrate (AlCit) and plugging performance of the linked polymer solution(LPS) was studied through nuclepore membrance filtration.
在较低剪切作用下,其对核孔膜的封堵性能影响较小;高速剪切下,交联聚合物溶液的封堵能力大大降低。
补充资料:最大的最大收益值准则
分子式:
CAS号:

性质: 也称最大的最大收益值准则。不确定型决策准则之一。其方法是:首先找出各方案的最大收益值,然后选择这些最大收益值中最大者所在的方案作为最满意方案。这个准则采取乐观主义态度,把方案最大收益值(或最小损失值)的自然状态,作为必然出现的自然状态采看待,从而把不确定型决策问题化为确定性决策问题来处理。选择最大收益值中最大的方案(对损失值来说就是选择最小损失值中最小的方案)作为最满意的方案,即取“最有利中之最有利”方案,所以亦称为“乐观的决策准则”。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条