1) surface roughness of wing
翼面粗糙度
2) surface roughness
表面粗糙度
1.
Research on Surface Roughness Characteristics of Plastic Die Steel in Magnetic Abrasive Finishing;
磁力研磨加工塑料模具钢的表面粗糙度特性研究
2.
Effect factors analysis of surface roughness of bearing ring groove;
轴承套圈沟道表面粗糙度影响因素分析
3.
Effects of Electromagnetic Field on Surface Roughness of High-activity TiAl Alloys;
电磁场对TiAl合金试样表面粗糙度的影响
3) roughness of surface
表面粗糙度
1.
The roll grinding and it's quantity of surface include precision,roughness of surface and mechanical capability.
轧辊磨削精度和表面质量主要指磨削过程中的加工精度、表面粗糙度和物理机械性能,而表面粗糙度是其中最主要的一个因素。
2.
The influences of cutting speed on cutting forces,cutting tempera-ture,roughness of surface,surface microstructure,and tool wear have been studied by the experiments.
对SiC颗粒增强铝基复合材料的高速切削加工性能进行了试验分析,研究了铣削速度对铣削力、切削温度、加工表面粗糙度、表面形貌和刀具磨损的影响,从而获得了能够保证对其进行高效率、高精度加工的合理工艺参数。
3.
The result shows that, due to the roughness of surface, the measured interface stress(f′) is always smaller than the actual one(f).
薄膜表面粗糙度对内应力的测量产生复杂的影响。
4) interface roughness
界面粗糙度
1.
Interface roughness of Mo/Si soft X-ray multilayers;
Mo/Si软X射线多层膜的界面粗糙度研究
2.
Interface roughness of multilayer dielectric optical thin film
多层介质薄膜膜层间界面粗糙度及光散射
3.
It is then extended to multi-layer structure and uses a mathematical modal from Stearns method to describing the multi-layer interface roughness at soft X-ray short wavelength region (1～10nm).
将这种方法应用到多层膜结构 ,并采用它的数学模型来描述软X射线短波段区域 (1～ 10nm)多层膜界面粗糙度。
5) the surface roughness
刀面粗糙度
1.
In order to research the influence of the surface roughness and the appearance of saw-teeth of knife blade of cemented carbide cutting-tools on quality of the machined surface, the contrast experiment of fine-cutting has been done using different point appearance of cemented carbide cutting-tools.
为研究刀面粗糙度及刀刃锯齿状态对已加工表面质量的影响,特别采用不同刀面粗糙度和刀刃锯齿状态的硬质合金刀具进行薄切削铝合金的对比试验。
6) wall roughness
壁面粗糙度
1.
The numerical simulation research of effect on turbulent boundary layer to a sudden increase in wall roughness in open-channel flow
壁面粗糙度突增对明渠紊流边界层影响的数值模拟研究
2.
On the basis of the experimental research,the significant influence of the wall roughness on the flame transmission law of the gas explosion was analyzed.
在实验研究的基础上,分析了壁面粗糙度对瓦斯爆炸过程中火焰传播规律的重要影响。
3.
On the basis of experiment, the influence of wall roughness on fire transmission and overpressure in gas explosion was investigated.
在试验的基础上,研究了瓦斯爆炸过程中壁面粗糙度对火焰传播速度和超压的影响。
补充资料：Pro/Engineer Drawing 表面粗糙度
1 概述
我们可以添加标准形式的表面粗糙度，下面列出了这些标准形式
Generic 切削加工 非加工
no_value
standard value value value
7.3.2 添加表面粗糙度
选择 DETAIL> Create > Surf Finish.
如果你还没有添加任何一种表面粗糙度，或者需要添加另一种类型的表面粗糙度，你需要“Retrieve”表面粗糙度；如果你需要添加已经存在的类型，你可以使用"pick Inst"选项；也可以使用"Name"选项
选择表面粗糙度的放置方式（有引线箭头、附着实体等）
选择需要的放置实体
输入表面粗糙度的值
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条