1) the least lubricating film thickness
最小润滑油膜厚度
2) thickness of lubricant film
润滑油膜厚度
1.
This paper takes account of the several factors including the contour curve of cam,the accuracy of motion, structure size and the time of normal work of cam mechanism by discussing the relationship between the roller radius and contour curve ,the touch-stress between the roller and cam, the thickness of lubricant film.
以凸轮机构的凸轮轮廓曲线、运动的准确性以及结构尺寸和寿命为考虑因素,讨论了凸轮机构从动件滚子的半径与轮廓曲线、凸轮高副的接触应力以及润滑油膜厚度等的关系,提出了滚子半径的选择原则。
3) thick film lubrication
厚油膜润滑
4) minimum film thickness
最小油膜厚度
1.
Selection of Basic Parameters of Gear Based on Minimum Film Thickness;
基于最小油膜厚度的齿轮基本参数选择
2.
The formula of minimum film thickness was given and it was successfully applied to calculate the minimum film thickness in the available product.
利用弹性流体动力润滑理论对滚柱轴承离合器的油膜厚度进行了分析,给出了最小油膜厚度的计算公式,进行了实例计算,为滚柱轴承离合器的设计和在制造精度上对其进行严格控制,提高其疲劳寿命和可靠性提供了理论依据。
3.
the minimum film thickness,maximum film pressure,no load pressure angle variation,journal center orbit,oil film distribution) could be calculated by running EXCEL software.
采用Southwest Crank/Bearing轴承计算程序进行数值计算,然后用EXCEL表做图形分析,得出最小油膜厚度、最大油膜压力、空载负荷线变化角、轴心轨迹、油膜分布等参数和图形。
5) minimum oil film thickness
最小油膜厚度
1.
By means of calculation and analysis for orbital paths and minimum oil film thickness(MOFT) of main bearings, it was discovered that some factors, such as overload, big radial clearance between pin and wall, overheat and loading with cold machine of multi-cylinders.
通过对主轴承轴心轨迹和最小油膜厚度(MOFT)的计算分析发现,内燃机超负荷运行,主轴颈与轴瓦间隙过大,过热及冷机加载等因素不利于主轴承流体动力润滑膜的形成,并加速主轴承的摩擦和磨损。
6) minimum oil (gas) film thickness
最小油(气)膜厚度
补充资料：柴油机润滑油
分子式：
CAS号：
性质：通称柴油机油。用于高速柴油发动机的润滑。由减压馏分油或脱沥青油为原料经脱蜡、溶剂精制和白土(或加氢)处理而得的润滑油的基础油，加添加剂调制而成。为保证有良好的高温清净性需加入高碱性金属清净剂、无灰分散剂及抗氧腐剂，对稠化柴油机油还需加入增黏剂。按美国石油学会(API)使用性能分为CA、CB(CA、CB已废止)、CC、CD等类别，按100℃运动黏度分牌号。
CAS号：
性质：通称柴油机油。用于高速柴油发动机的润滑。由减压馏分油或脱沥青油为原料经脱蜡、溶剂精制和白土(或加氢)处理而得的润滑油的基础油，加添加剂调制而成。为保证有良好的高温清净性需加入高碱性金属清净剂、无灰分散剂及抗氧腐剂，对稠化柴油机油还需加入增黏剂。按美国石油学会(API)使用性能分为CA、CB(CA、CB已废止)、CC、CD等类别，按100℃运动黏度分牌号。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条