1) Design Of Experiment(DOE)
试验设计(DOE)
1.
Optimization process of crankshaft induction hardening by design of experiment(DOE)
用试验设计(DOE)法优化曲轴感应淬火工艺
2) DOE experiment design
DOE试验设计
1.
Investigation on optimizing the suspension polymerization formula for PVC by DOE experiment design;
运用DOE试验设计优化悬浮法PVC聚合配方的探索
3) DOE experiment
DOE试验
1.
The optimum conditions(foaming temperature 115℃,saturatio pressure 15MPa and foaming time 1s ) were obtained according to DOE experiments results to achieve high open cell degree(61.
本课题首先以纯PLA为基体,采用快速降压法,运用DOE试验研究了三个主要工艺参数发泡温度、饱和压力和发泡时间对发泡过程的影响,并确定了试验空间内获得较高开孔度和较小表观密度的最佳工艺条件为发泡温度115℃、饱和压力15MPa、发泡时间:15s,在该工艺条件下获得了开孔率61。
2.
Gas-assisted molding parameters were opbimjzed by DOE experiments,through sorting the number of factors and their levels,the designed fit models were built and residuals were analyzed.
将DOE试验设计引入气辅注塑成型参数配置和优化中,通过遴选试验因子及其水平数量拟合选定模型,进行残差分析,优化成型参数,并用试验验证该方法可有效地消除注射缺陷。
4) DOE method
DOE设计优化
5) experiment design
试验设计
1.
Application of uniform design in evolutionary operation experiment design;
均匀设计在调优试验设计中的应用
2.
An orthogonal experiment designed with four factors and five levels was conducted; the four factors were nozzle diameter, barrel temperature, screw speed, and maize moisture before extrusion.
本研究以挤压机模孔孔径、套筒加热温度、原料含水量、螺杆转速为考察因素,利用不同挤压条件下的膨化脱胚玉米制取淀粉糖浆,同时以糖液过滤速度为评价指标,选定四因素五水平进行二次正交旋转组合试验设计,利用Reda软件建立回归方程及进行单因素图形分析,探讨出各影响因素对试验指标的影响规律,考察各试验因素对指标因子贡献率的大小,并采用频数选优的方法,给出了生产实践中可供选择的组合参数,以达到解决用挤压脱胚玉米生产淀粉糖浆糖化液过滤性能差的难题,从而为能将挤压技术应用于实际生产中提供了科学依据。
3.
In chemical technology experiment,the relation between reactant and product just as input and output in econom-ics,based on this,the paper applies DEA into chemical technology experiment design.
数据包络分析(DEA)是以”相对效率评价”基于化工试验中反应物、生成物之间的投入、产出关系,探讨了化工试验设计,主要探讨了在化工试验设计中DEA 作为评价正交试验设计方法的一种有效的分析工具的理论和应用。
6) test design
试验设计
1.
Application of Monte Carlo method in optimization calculation of multiple reponses test design;
蒙特卡罗法用于多指标试验设计的优化计算
2.
Basis on the usage of eggshell， the optimization of isolation agent of dosage， soaking time and temperatures was studied by using the method of saturated test design． The products of calcium gluconate， calcium lactate and calcium acet ate were synthesized.
以鸡蛋壳的综合利用为目的，采用饱和试验设计，确定最佳壳膜分离剂的用量、浸泡时间和浸泡温度。
3.
To assess the high reliability of initiating explosive device with small samples,the test design plan with small samples for initiating explosive devices was studied.
为了实现火工品高可靠性指标的小样本评估,研究了火工品可靠性评估小样本试验设计方案,给出了基于试验信息熵的小样本试验设计方法。
补充资料：焦化试验室设计(见焦化厂试验室设计)
焦化试验室设计(见焦化厂试验室设计)
design of coking laboratory
J一aohua shiyanshi sheji焦化试验室设计(design of。oking laborato-ry)见焦化厂试验室设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条