1) cladding tool material
覆层刀具材料
1.
The ceramic metal cladding tool material prepared by cladding the ternary boride base ceramic on the metal substrate is a new type of tool material which has great developable potentiality because of having functional dominances of both high hardness, excellent wear resistance of ceramic and high strength, toughness, good thermal conductivity of metal.
通过在金属基体上覆层三元硼化物基陶瓷制备出的陶瓷—金属覆层刀具材料同时具有陶瓷材料硬度高、耐磨性好和金属材料强度高、韧性好、导热性好的性能优势 ,是一种极具发展潜力的新型刀具材
2) cutting tool coating material
刀具涂层材料
3) tool materials
刀具材料
1.
High performance ceramic composite tool materials;
高性能复合陶瓷刀具材料
2.
Si_3N_4/TiC nanocomposite ceramic tool materials were fabricated by adding Si_3N_4 and TiC nanoparticles and with Al_2O_3 and Y_2O_3 as additives.
在微米Si_3N_4基体中加入纳米Si_3N_4及TiC颗粒,以Al_2O_3和Y_2O_3作为助烧结剂,通过热压烧结制备了Si_3N_4/TiC纳米复合陶瓷刀具材料,研究了该材料在800～1250℃时的氧化行为。
3.
The author gave us the reasonable selection of tool materials、tool parameters and cutting parameters during turning of hardened steel in order to get the ideal cutting result.
着重说明了车削淬火钢件时,如何通过合理地选用刀具材料、刀具几何参数及切削用量达到理想的切削效果,并提出车削淬火钢件时应注意的若干问题。
4) cutting tool material
刀具材料
1.
This article, through understanding the high-speed cutting processing definition, discusses the high-speed cutting application characteristic, the high-speed cutting craft superior, the shortcoming in the mold processing, and it has analyzes the high-speed cutting ,cutting tool material choice and the application.
理解高速切削加工的定义,了解高速切削应用特性及在模具加工中的优、缺点,对高速切削的刀具材料的选择及应用有极大帮助。
2.
To strengthen the research and development of the cutting tool materials further and to select the cutting tool materials rationally, it is the important prerequisite of promoting high-speed cutting technology to use and develop extensively.
进一步加强刀具材料的研究和开发,并合理地选择刀具材料,是推动高速切削技术应用和发展的重要前提。
3.
The important role and development of cutting tool materials in human history are introduced.
论述了刀具与刀具材料在人类历史中发挥的重要作用，阐述了各种刀具材料（高速钢，硬质合金，陶 瓷，金刚石，立方硼等）化学成分的种类与进展。
5) cutter material
刀具材料
1.
Choice of cutter materials when dealing with hard-to-be-cut material;
难加工材料切削时刀具材料的选择
2.
Some factors affecting the machinability of high manganese steel such as cutter materials,cutter geometrical parameters,work capacity,cutting force and cutter serviceability have also been discussed.
本文介绍了高锰钢切削加工性能的优缺点,从刀具材料、刀具几何参数、切削用量、切削力、刀具耐用度等方面阐明了对高锰钢切削加工的影响,并给出高锰钢合理切削条件。
3.
Self lubricating cutter materials are excellent in antifriction and wear resistance.
自润滑刀具材料具有优异的减摩、抗磨性能 ,其开发与应用对提高切削加工生产率、降低加工成本、减少资源消耗、防止切削液污染环境、实现绿色加工具有重要意义。
6) cutting tool materials
刀具材料
1.
Application analysis of high-speed cutting tool materials;
高速切削刀具材料的应用分析
2.
Fuzzy cluster analysis of the physical and mechanical propterties of the cutting tool materials;
刀具材料物理机械性能的模糊聚类分析
3.
In recent years, the rapid development of cutting tool materials is obviously along with the development of coating technology and processing industry.
随着涂层技术及加工业的发展 ,近年来国内外刀具材料发展迅速。
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条