1) assembly type
组装型式
1.
The application foreground of the assembly type will be large in future.
本文通过对三万Ⅱ回巴东大跨越工程中耐张绝缘子串组装型式进行比选,确定六联串组装型式为最优方案;同时对六联串组装型式在正常运行和事故断一联情况下进行受力分析,计算绝缘子受力均满足设计要求,对以后大跨越设计具有一定的指导意义。
2) New cartridge combination valve
新型插装式组合阀
3) assembled formation
组装成型
1.
In combination with the manufacture of an atmospheric tower,this paper discusses the manufacture quality control of large scale pressure vessels made of clad stainless steel plates with respect to vessel assembled formation and clad.
文章通过常压塔的制造,从容器的组装成型和不锈钢复合钢板的焊接两方面论述了不锈钢复合钢板压力容器制造质量的控制方法。
5) model assembling
模型组装
1.
Decision model assembling is an important function of intelligent decision support system.
决策模型组装是智能决策系统中的重要功能。
6) assembly way
组装方式
1.
The diamond was synthesized by accepting assembly way and synthetic technology of the powder technology at high temperature and high pressure.
以单质金属粉为原料,采用粉末冶金方法制备了片状铁基触媒,并借鉴目前金刚石工业中最为常用的粉末触媒组装方式及合成工艺在高温高压下进行了金刚石合成试验。
2.
In the paper PCBN is synthesized in UDS-Ⅱ six-anvil hydraulic press in three different assembly ways with pure graphite pot, pure graphite pot+molybdenum cup, pure graphite pot+molybdenum cup+NaCl tube.
PCBN已成为现代切削加工中不可缺少的重要刀具材料,本文使用石墨罐、石墨罐+钼杯、石墨罐+钼杯+NaC l管三种不同的组装方式在UDS—Ⅱ型六面顶液压机上进行PCBN的合成,合成压力用油表压来标示,烧结温度用温度显示仪来监测,控制在1350℃~1500℃之间,保持该温度5~10 m in,三种组装方式的合成条件相同。
补充资料：55°圆锥管螺纹型式和尺寸
| 螺纹代号 | 基本尺寸 英 寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 圆弧尺寸 r | 底孔尺寸 mm |
| R 1/16 | 1/16＂ | 7.723 | 0.907 | 28 | 7.142 | 6.561 | 0.581 | 0.125 | 6.4 |
| R 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 0.125 | 8.4 |
| R 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 0.184 | 11.2 |
| R 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.950 | 0.856 | 0.184 | 14.75 |
| R 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 0.249 | 18.25 |
| R 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 0.249 | 23.75 |
| R 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 0.317 | 30 |
| R 1 1/4 | 1 1/4＂ | 41.910 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 0.317 | 38.5 |
| R 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 0.317 | 44.5 |
| R 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 0.317 | 56 |
| R 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 0.317 | 71 |
| R 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 0.317 | 85.5 |
| R 4 | 4＂ | 113.030 | 2.309 | 11 | 111.551 | 110.072 | 1.479 | 0.317 | 110.5 |
| R 5 | 5＂ | 138.430 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 0.317 | 136 |
| R 6 | 6＂ | 163.830 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 0.317 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条