2) Mg-Mn interalloy
镁-锰中间合金
1.
For the purpose to manufacture the new magnesium alloys which have good corrosion resistance,mechanical property,welding performance and biocompatibility,we prepared the Mg-Mn interalloy(Mn-content is more than 10wt%) by stirring cast.
为了提高镁-锰中间合金中锰元素的利用率,制备具有高耐腐蚀性、力学性、焊接性以及生物相容性的新型镁合金,应用搅拌铸造法制备了含锰量超过10%(质量分数)的中间合金。
3) gold-manganese alloys
金锰合金
4) silicon-manganese alloy
硅锰合金
1.
Rapid analysis of silicon,phosphorus and manganese contents in silicon-manganese alloy;
硅锰合金中硅、磷、锰的快速分析
2.
Dissolving sample with nitric acid and hydrofluoric acid,the silicon content of silicon-manganese alloy was made a measurement with ICP-AES method in the hydrofluoric acid-resistant spray devices.
用硝酸和氢氟酸溶解试样,采用耐氢氟酸雾化装置,用ICP-AES法测定硅锰合金中的硅。
5) Al-Mn allays
锰铝合金
1.
The solid-liquid mixed casting of Al-Mn allays was studied by adding same alloys powder, the structure and performance of the material prepared by solid-liquid mixed casting was analyzed.
2%;优于传统铸造和半固态铸造合金,使难以应用的高锰铝合金有了应用可能。
6) Ni-Mn alloy
镍锰合金
1.
Study on Ni-Mn Alloy Electroforming of Nozzle and Its Fracture Problem;
喷管的镍锰合金电铸及其开裂问题的研究
2.
Ni-Mn alloy,as a matrix of wear-resistance skid-plate,was electrodeposited from sulfate-chloride baths at ambient temperature,current density of 0.
用于耐磨滑履胎体的镍锰合金在硫酸盐-氯化物电镀溶液中沉积,试验在室温下进行,pH在3。
3.
The electroforming of Ni-Mn alloy for the thin-wall revolving part was carried out with a device that could be used to electroform a revolving part.
利用可以电铸回转体零件的装置,开展了薄壁回转体零件的镍锰合金电铸试验。
补充资料：钯镍锰合金
分子式：
CAS号：
性质：是钯含镍和锰的三元高温钎料合金，可稳定地抗钠和钠钾共晶的侵蚀。PDNiMn48-31合金的熔点1120℃。用真空中频炉充氩熔炼，均匀化水淬冷加工成材。用来钎焊不锈钢、镍合金、钨和钼，纤焊接头高温度比钯银锰合金还要高，此外还可钎接（在真空中）钛、锆和铌等材料。
CAS号：
性质：是钯含镍和锰的三元高温钎料合金，可稳定地抗钠和钠钾共晶的侵蚀。PDNiMn48-31合金的熔点1120℃。用真空中频炉充氩熔炼，均匀化水淬冷加工成材。用来钎焊不锈钢、镍合金、钨和钼，纤焊接头高温度比钯银锰合金还要高，此外还可钎接（在真空中）钛、锆和铌等材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条