厚壁汽包,evaporator,在线英语词典,英文翻译,专业英语

1) evaporator

厚壁汽包

2) thick wall

厚壁

The author analyzed the reasons for the collapse hole,contracted hole and wrinkle resulted in DB941 series of the emission tubes with the thick wall which were made from 95%Al2O3 porcelain,and put out the measures to solve them,which meets the needs of the production.

对用95%A l_2O_3瓷制厚壁发射管D B941系列产品会造成塌坑、缩孔、皱纹等缺陷进行了分析,并探索其产生的原因,提出了解决的方法,满足了生产所需。

A type of thermal rotary extruding technology,which is used for shaping thick wall seal heads,was studied and tested.

研究并试验了厚壁封头成形的热旋加工工艺 ,摸索出适宜的加热方式和加热部位 ,选择出合适的加热温度区域 ,从而对提高封头旋压机的生产能力 ,改善封头成形质量 ,提高成形效率 ,提供了可靠的科学依据和方法。

The drawing process of thick wall semi spherical heads is analyzed through dividing the billet into four regions.

针对厚壁半球形封头的拉深成形 ,将板坯分成 4个区域 ,根据每个区域的应力分布特点 ,对每个区域的壁厚变化规律做了理论上的推导与计算 ,并将理论计算值同有限元模拟结果比较 ,得到了很好的效

3) thick walls

厚壁

A method of automatic ultrasonic detection for tubes with thick walls are introduced.

介绍了厚壁承压无缝钢管超声波探伤方法,自动化探伤中探头的扫查设计,以及采用该方法开发的钢管自动探伤设备的实用效果。

4) thick leg

厚壁

The ductility analysis of R.C.shaped columns with thick leg;

影响厚壁异形柱的延性性能因素分析

Study the worst loaded angle of RC T-shaped columns with thick leg;

厚壁T形柱最不利荷载角的确定

5) Thick wall cylinder

厚壁圆筒

A hydraulic method for determining incipient yield pressure of thick wall cylinder;

测定厚壁圆筒初始屈服压力的液压方法

This paper performs the limit analysis of a thick wall cylinder of linear strengthened material based on the unified strength theory.

运用统一强度理论对承受内压的拉压屈服强度不同的线性强化材料的厚壁圆筒进行了极限载荷分析,得到了适用于多种材料的厚壁圆筒极限载荷的统一解析式。

Using elastic solution of thick wall cylinder, it is analyzed that the optimum design on three-layers assembled cavity die of cold extrusion under the elastic limit stress.

应用厚壁圆筒的弹性解 ,分析了冷挤压三层组合凹模具有最大弹性极限时的优化设计 ,推导了三层组合凹模的最大承压、各层分界面半径和分界面过盈量的优化设计计算公式。

6) thick-wall tube

厚壁管

The process for preparing TC4 thick-wall tube by radial forging was studied.

研究了用径向锻造方法制备TC4厚壁管材的生产工艺。

The main parameters of open-die cold extrusion without mandrel of thick-wall tube are analyzed.

分析了厚壁管件无芯棒开式冷挤压的主要参数；确定了该工艺极限变形程度的判断依据；对两种不同厚径比的厚壁管极限变形程度进行了试验研究，给出了可供实际应用的数据。

参考词条

大型厚壁厚壁管道厚壁截面厚壁容器厚壁锥体厚壁铸管厚壁铸件厚壁板厚壁管材紫外重叠光谱轴心轨迹分析仪

补充资料：钢坯加热炉低位汽包汽化冷却装置

钢坯加热炉低位汽包汽化冷却装置

钢坯加热炉低位汽包汽化冷却装置

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引厚壁接管厚壁球壳厚壁筒体超厚壁厚壁管件厚壁筒

1) evaporator 厚壁汽包 2) thick wall 厚壁 1. The author analyzed the reasons for the collapse hole,contracted hole and wrinkle resulted in DB941 series of the emission tubes with the thick wall which were made from 95%Al2O3 porcelain,and put out the measures to solve them,which meets the needs of the production. 对用95%A l_2O_3瓷制厚壁发射管D B941系列产品会造成塌坑、缩孔、皱纹等缺陷进行了分析,并探索其产生的原因,提出了解决的方法,满足了生产所需。 2. A type of thermal rotary extruding technology,which is used for shaping thick wall seal heads,was studied and tested. 研究并试验了厚壁封头成形的热旋加工工艺 ,摸索出适宜的加热方式和加热部位 ,选择出合适的加热温度区域 ,从而对提高封头旋压机的生产能力 ,改善封头成形质量 ,提高成形效率 ,提供了可靠的科学依据和方法。 3. The drawing process of thick wall semi spherical heads is analyzed through dividing the billet into four regions. 针对厚壁半球形封头的拉深成形 ,将板坯分成 4个区域 ,根据每个区域的应力分布特点 ,对每个区域的壁厚变化规律做了理论上的推导与计算 ,并将理论计算值同有限元模拟结果比较 ,得到了很好的效 3) thick walls 厚壁 1. A method of automatic ultrasonic detection for tubes with thick walls are introduced. 介绍了厚壁承压无缝钢管超声波探伤方法,自动化探伤中探头的扫查设计,以及采用该方法开发的钢管自动探伤设备的实用效果。 4) thick leg 厚壁 1. The ductility analysis of R.C.shaped columns with thick leg; 影响厚壁异形柱的延性性能因素分析 2. Study the worst loaded angle of RC T-shaped columns with thick leg; 厚壁T形柱最不利荷载角的确定 5) Thick wall cylinder 厚壁圆筒 1. A hydraulic method for determining incipient yield pressure of thick wall cylinder; 测定厚壁圆筒初始屈服压力的液压方法 2. This paper performs the limit analysis of a thick wall cylinder of linear strengthened material based on the unified strength theory. 运用统一强度理论对承受内压的拉压屈服强度不同的线性强化材料的厚壁圆筒进行了极限载荷分析,得到了适用于多种材料的厚壁圆筒极限载荷的统一解析式。 3. Using elastic solution of thick wall cylinder, it is analyzed that the optimum design on three-layers assembled cavity die of cold extrusion under the elastic limit stress. 应用厚壁圆筒的弹性解 ,分析了冷挤压三层组合凹模具有最大弹性极限时的优化设计 ,推导了三层组合凹模的最大承压、各层分界面半径和分界面过盈量的优化设计计算公式。 6) thick-wall tube 厚壁管 1. The process for preparing TC4 thick-wall tube by radial forging was studied. 研究了用径向锻造方法制备TC4厚壁管材的生产工艺。 2. The main parameters of open-die cold extrusion without mandrel of thick-wall tube are analyzed. 分析了厚壁管件无芯棒开式冷挤压的主要参数；确定了该工艺极限变形程度的判断依据；对两种不同厚径比的厚壁管极限变形程度进行了试验研究，给出了可供实际应用的数据。参考词条大型厚壁厚壁管道厚壁截面厚壁容器厚壁锥体厚壁铸管厚壁铸件厚壁板厚壁管材紫外重叠光谱轴心轨迹分析仪补充资料：钢坯加热炉低位汽包汽化冷却装置钢坯加热炉低位汽包汽化冷却装置钢坯加热炉低位汽包汽化冷却装置说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com