1)  lateral shift
横移量
1.
The real geometry and edge conditions of wheel-rail are simulated and the influence of different wheel diameters,different axle loads and different lateral shift of wheel set on contact stress are studied.
利用ANSYS有限元分析软件对轮轨接触进行了弹性静力分析,模拟了轮轨真实的几何形状和边界条件,分别研究了轴重、轮径、横移量对接触应力的影响,并对各种参数的变化规律进行了分析,得出了轮轨间接触应力的分布规律。
2)  transverse shift
横移
1.
Large heavy bridge girder transverse shifting and lowering technology;
大吨位桥梁横移落梁施工技术
2.
In consideration of the effect of solid rocket mo tor thrust deviation and transverse shift,the stage separation process of two-s tage ground-to-air missile was modeled and simulated by using six-freedom-de gree ballistic equation,and the process of principal control signal sheltered by booster was modeled and analyzed.
考虑固体发动机推力偏斜和横移的影响,应用六自由度弹道方程对地空导弹级间分离进行了建模、仿真。
3.
The application of transverse shift of centering to bridge construction is introduced based on construction practice.
结合工程实例介绍了膺架横移在桥梁施工中的具体应用。
3)  transverse movement
横移
1.
The crane system is of large span,high lifting capaciby,good adaptability and convenient transverse movement.
针对吊装拱肋施工的需要,设计和研制了一套大吨位移动式桅杆缆索吊系统,这套缆索吊系统具有跨越和起重能力大、适应性强、塔架横移方便等特点,其吊装重量达到92t,成功地拼装了相距27m的三条拱肋。
4)  roll shifting
轧辊横移
1.
Some typical roll shapes available to vary roll gap through roll shifting in rolling process were analyzed comparatively,such as basic CVC roll,optimal CVC roll and SMART Crown roll in view of the shape design,axial load acting on the roll and no-load roll gap.
以典型的轧辊横移变凸度辊型,如基本CVC辊型曲线、优化设计的CVC辊型曲线及SMARTCrown辊型曲线为研究对象,从辊型曲线设计、轧制过程中轧辊所受轴向力及无载辊缝凸度等方面进行比较分析。
5)  shogging mechanism
横移机构
1.
The design and simulation of shogging mechanism based on ADAMS;
基于ADAMS的电子提花横机横移机构设计与仿真
2.
Designed shogging mechanism for the electric flat knitting machine based on an analysis of the needle bar shogging mechanism,analyzed it kinematically and dynamically,made a virtual prototype and simulated the motion of the shogging mechanism.
设计了电子提花横机的针床横移机构,并进行了运动学和力学分析,建立了虚拟样机模型,对横移机构运动进行了计算机仿真。
6)  cross sliding machine
横移机
1.
The process and equipments for hot feeding and hot charging in continuous-casting slab production are introduced, the power of transfer roll table, cross sliding machine and turn table calculated, the economic profit stated.
介绍了福建三钢闽光股份有限公司连铸坯热送热装工艺及设备,对输送辊道、横移机、转盘的功率进行计算,阐述了连铸坯热送热装技术及设备在轧钢生产上的经济效益。
参考词条
补充资料:观李中丞洪二美人唱歌轧筝歌(时量移湖州长
【诗文】:
君家双美姬,善歌工筝人莫知。轧用蜀竹弦楚丝,
清哇宛转声相随。夜静酒阑佳月前,高张水引何渊渊。
美人矜名曲不误,蹙响时时如迸泉。赵琴素所嘉,
齐讴世称绝。筝歌一动凡音辍,凝弦且莫停金罍。
淫声已阕雅声来,游鱼噞喁鹤裴回。主人高情始为开,
高情放浪出常格。偶世有名道无迹,勋业先登上将科。
文章已冠诸人籍。每笑石崇无道情,轻身重色祸亦成。
君有佳人当禅伴,于中不废学无生。爱君天然性寡欲,
家贫禄薄常知足。谪官无愠如古人,交道忘言比前躅。
不意全家万里来,湖中再见春山绿。吴兴公舍幽且闲,
何妨寄隐在其间。时议名齐谢太傅,更看携妓似东山。



【注释】:



【出处】:
全唐诗:卷821-21
说明:补充资料仅用于学习参考,请勿用于其它任何用途。