1) stress-strain
应力–应变
1.
A double-phase model was established to evaluate the stress-strain properties of foamed beads light soil.
利用两相体模型建立发泡颗粒轻质土的应力–应变关系,对不同配比轻质土的应力–应变特性进行评价,并利用试验结果对模型的合理性进行验证,为轻质土的工程应用提供必要的理论依据。
2.
The behavior of sand reinforced with different 3D reinforcing configurations was studied in terms of stress-strain relationship and shear strength of the soil.
针对加筋土中传统的筋材布置特点,提出了立体加筋土的概念,并设计了采用轴对称布置的单层立体加筋砂土的试验方案,进行了48组镀锌铁皮和橡胶板两种筋材的单层立体加筋砂土的室内三轴试验,探讨了不同立体加筋方式、不同围压作用下应力–应变及强度变化规律。
3.
Based on triaxial shear tests (CU) of saturated soft clay of marine deposit,the behaviors of stress-strain relationship of undisturbed soil of marine deposit,remolded soil and overconsolidated soil were analyzed.
通过淤泥质饱和软粘土的三轴固结不排水剪切试验,研究了海相沉积原状土、重塑土以及超固结土在动力固结后的应力–应变性状表现。
2) stress-strain
应力-应变
1.
Effect of notch root radius on stress-strain distribution and martensite transformation of shape-memory alloy NiTi in front of notch;
缺口根半径对NiTi形状记忆合金缺口前应力-应变分布和马氏体相转变的影响
2.
Tensile stress-strain behavior of butadiene rubber/organo-montmorillonite nanocomposite Ⅰ.Stress-strain curves and its simulation;
顺丁橡胶/有机蒙脱土纳米复合材料的拉伸应力-应变行为 Ⅰ.应力-应变曲线及其理论模拟
3.
Reasonable descriptions on some problems of stress-strain and their invariables;
有关应力-应变及其不变量若干问题的合理表述
3) stress and strain
应力应变
1.
Finite Element Simulation of Stress and Strain of Concasting Slab during Straightening;
连铸板坯矫直过程应力应变的有限元模拟
2.
Temperature stress and strain control technology of hollow high pier construction;
70m以上空心高墩施工的温度应力应变控制
3.
Study of pipeline stress and strain automatic monitoring system;
长输管道应力应变自动化监测系统研究
4) stress-strain
应力应变
1.
Analysis on the factors influencing stress-strain of mining field and mine roadway;
影响采场和巷道应力应变因素分析
2.
Research on stress-strain of oil seed by cold pressing;
油料冷榨的应力应变关系研究
3.
Research on stress-strain of rapeseed by uniaxial pressing underdouble-surface for flow of fluids through a porous medium;
侧限双面渗流压榨下的菜籽应力应变关系研究
5) stress strain
应力应变
1.
To adopt finite meta method analyzes stress strain action of Al-plastic compound pipe under Analog load status and studies the influence of load capacity by variation of diameter of medium Al layer and change of joint part length lap joints.
采用有限元方法分析了铝塑复合管在模拟承载状态下的应力应变行为,研究了中间铝层的直径变化以及搭接接头搭接部分长度的变化对承载行为的影响。
2.
The varied laws of the extrusion pressure and stress strain with extrusion parameters in the sample are obtained.
5软件对不同挤压参数下钨合金静液挤压过程进行了数值模拟研究 ,得出了挤压压力、试样内部应力应变场随挤压参数的变化规律 ,并与光刻网格的挤压结果进行了比较 ,说明有限元法的计算结果和实验结果符合很好。
6) stress/strain
应力/应变
1.
Quenching technology is a high non-linear process with the effect of temperature,phase-transformation and stress/strain each other.
针对淬火过程应力/应变场的特点,给出了淬火过程弹性区、塑性区的应力应变关系。
2.
Secondly, the wireless stress/strain measurement system is integrated with the composites.
为监测混凝土结构性态,开发了一种机敏镍粉水泥基材料及其无线应力/应变测试系统。
补充资料：动态应力-应变曲线
分子式：
CAS号：
性质： 在具有强迫正弦振荡的动态试验中，让黏弹性体作稳定振动，以力对变形作图，在十个周期中的轨迹为一封闭曲线，称之为动态应力-应变曲线。动态试验的结果取决于试验条件：试样形状、形变方式、应变振幅、应变历程、频率和温度。从动态应力-应变曲线可以求得黏弹性体的许多动态力学性能，如从封闭曲线面积可以求得在一个周期内材料内部的发热量。
CAS号：
性质： 在具有强迫正弦振荡的动态试验中，让黏弹性体作稳定振动，以力对变形作图，在十个周期中的轨迹为一封闭曲线，称之为动态应力-应变曲线。动态试验的结果取决于试验条件：试样形状、形变方式、应变振幅、应变历程、频率和温度。从动态应力-应变曲线可以求得黏弹性体的许多动态力学性能，如从封闭曲线面积可以求得在一个周期内材料内部的发热量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条