1) highway cut
道路路堑
2) cutting
[英]['kʌtɪŋ] [美]['kʌtɪŋ]
路堑
1.
Research on treating measures of expansive soil cutting slope;
膨胀土路堑边坡防治措施的研究
2.
Replacement thickness analysis of cutting in expansive soil area;
膨胀土区域路堑换填厚度分析
3.
Smooth blasting construction in side slope of cutting at yishui expressway;
宜水高速公路路堑边坡光面爆破施工
3) cut slope
路堑
1.
Through geological investigation and field monitoring of Ningming tertiaryi limnic weathered mudstone and residual soil cut slopes of Nanning-Youviguan,Express the characteristics of water content,temperature,shrinking coefficient,swelling quantity variation under 50 kPa with depth of natural slopes and cut slopes in swell and shrinking active zone of expansive soil were studied.
通过对南(宁)友(谊关)高速公路宁明下第三系湖相风化泥岩及其残积土路堑边坡的系统地质调查、现场监测,对比研究了膨胀土自然边坡和路堑边坡胀缩活动带的含水率、地温、收缩系数及50 kPa下膨胀量随深度的变化特征,结合对边坡胀缩裂隙与滑坡体形态要素的相关性分析,提出了胀缩活动带滑坡的半定量破坏模式,为有效进行工程处治提供了依据。
2.
This paper expounds the technical features,construction processes and construction points of the prestressed anchor rope construction technique for the high-cut slope of the road engineering,and puts forward some treating measures for the common problems and some points for the construction safety.
阐述了道路工程高路堑边坡预应力锚索施工的工艺特点、施工工艺及施工要点,提出了常见问题的处理措施及施工安全要点。
4) cut
[英][kʌt] [美][kʌt]
路堑
1.
Deformation and stability of soil cutting side slope;
浅谈土质路堑边坡变形与稳定性
2.
Discussion on new technique for protection of rocky cut side slope and sodding.;
浅谈石质路堑边坡防护及绿化新技术
3.
Construction and technical & economic analysis of high side slope cut of additional second track to existing electric railways;
电气化铁路增二线高边坡路堑施工与技术经济分析
5) cutting slope
路堑
1.
Analysis of sensitivity factors to stability of bedding rock cutting slope;
顺层岩质路堑边坡稳定性的敏感性因素分析
2.
Stability of cutting slope under condition of rainfall infiltration;
降雨入渗条件下路堑边坡稳定性
3.
Analysis of the reasons for the landslide of expansive soil cutting slope in expressway construction;
高速公路膨胀土路堑坍滑原因分析
6) sunk road
堑路
补充资料：《汽车道路试验方法通则》(GB／T12534—1990)
《汽车道路试验方法通则》(GB／T12534—1990)
Motor Vehicles-General Rules of Road Test Method
Qiehe Dcolu ShiYOn Fangfa Tongze《汽车道路试验方法通则》(GBIT 12534一l，男))(掬肠勿r Vehic如一晓砚m之凡凌3 of Road Test角伦汤记)规定了汽车道路试验方法中通用的试验条件和试验车辆的准备工作。规定的试验条件为装载质t、轮胎气压、嫩料、润滑油和制动液、气象、试验仪器和设备、试验道路等，对各种车辆列出具体指标值。规定的试验车辆准备是必须进行接车检查、车辆离合和预热行驶。对汽车起动性能、汽车滑行、牵引性能、重心高度测定、爬陡坡试验、最小转弯直经测定、地形通过性试验、发动机冷却系统冷却能力道路试验、加速性能、最高车速、燃料耗量、隔热通风、最低稳定车速、速度表和里程表检验校正方法等制定了具体的试验方法。为使这些方法规范化和科学合理，发布了国家标准《汽车道路试验方法通则》(CBIT 12534一19男))，并对上述的具体试验方法也发布了国家标准GBIT 12535-GB厅1之549。这一系列标准的发布，对发展民族汽车工业，提高汽车质量，促进汽车工业大踏步发展起了重要作用。(陈志田)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条