1) chlorine gas sensor
氯气传感器
1.
The developed chlorine gas sensor based on controlled potential electrolysis has PTFE multi-hole hating-water membrane and diffusion electrode which be made ultramicroparticle gold power by pressured compostite method.
研制的控制电位电解法氯气传感器,采用聚四氟乙烯(PTFE)多孔憎水膜和超细微粒金粉经加压复合制备的扩散电极。
2.
Through analyses of the sensitivity-concentration relation curve of a kind of chlorine gas sensors, a simple mathematic model was established, and a power function curves correcting circuit was designed based on this model.
本文通过分析氯气传感器灵敏度与气体浓度对应曲线,建立简单的数学模型,以实时模拟计算芯片AD538为核心,并设计了一种用于传感器幂函数特性曲线修正的非线性校正电路,指数可在(2。
2) hydrogen chloride sensor
氯化氢气体传感器
3) blood chloride ion transducer/sensor
血氯传感器
4) gas sensor
气体传感器
1.
Application of SnO_2 nanoparticle gas sensors in CO_2 gas detection;
SnO_2纳米颗粒气体传感器在CO_2气体检测中的应用
2.
Development of novel electrochemical CO gas sensor;
新型电化学CO气体传感器的研制
3.
Surface acoustic wave gas sensors based on gas-liquid phase transition effect;
基于气液相转变效应的SAW气体传感器
5) gas sensors
气体传感器
1.
Application of gas sensors in detecting the pork freshness;
气体传感器在猪肉新鲜度检测中的应用研究
2.
Development of solid-state gas sensors for monitoring sulfur dioxide;
全固态SO_2气体传感器的研制
3.
Application of one-dimensional nano-sized materials in gas sensors;
一维纳米材料在气体传感器中的应用
6) Oxygen sensor
氧气传感器
1.
Study of contradicting electrode poisoning for oxygen sensor of solid electrolyte;
固体电解质氧气传感器抗电极中毒的研究
2.
The preparation of active copper electrode and its application as anode in a KOH electrolyte based galvanic cell oxygen sensor were discussed.
使用活性铜电极作为阳极、以金电极为阴极、以KOH溶液为电解液,制备了原电池型氧气传感器,并对活性铜电极的制备进行了细致的考察。
3.
It consists of a humidity transducer based on a capacitive humidity sensor,a temperature transducer based on a thermistor sensor,a fuel-cell oxygen sensor and a special high density integrated chip as the follow-up circuit matched with special software.
文中介绍集热敏电阻型温度传感器,高分子薄膜电容式湿度传感器,原电池型氧气传感器,以及高度集成化的专用芯片为后续电路,配以自行开发软件的智能化温湿度、氧浓度测量仪。
补充资料：变压器式传感器
利用变压器作用原理把被测位移转换为初、次级线圈互感变化的变磁阻式传感器。它由两个或多个带铁心的线圈构成，初、次级线圈间的互感能随衔铁或两个线圈间的相对移动而改变。当用适当频率的电压激励初级线圈时,次级线圈的输出电压将随互感的改变而变化,从而将被测位移转换为电压输出。这种传感器在使用中常采取两个同名端串接的次级绕组线圈，以差动方式输出，所以又称为差动变压器式传感器。变压器式传感器的特点与电感式传感器相同，有时亦称电感式传感器。但变压器式传感器在设计上具有更大的灵活性，应用更为广泛。旋转变压器、感应同步器、自整角机都属于变压器式传感器。变压器式传感器主要用于测量位移和能转换成位移量的力、张力、压力、压差、加速度、应变、流量、厚度、比重、转矩等参量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条