1) cermet additive
金属陶瓷添加剂
1.
Through the tests of ball-on-disc and pin-on-disk,the wear performance of steel/grey cast iron friction pair was investigated using a cermet additive with the main composition of Al_4[Si_4O_(10)](OH)_8 in lubricating oil.
结果表明,该金属陶瓷添加剂表现出显著的抗磨性能,提高了钢/铸铁摩擦副承载能力和使用寿命;随着添加剂含量的增加,抗磨作用更加明显,负磨损现象开始出现;该添加剂可以抑制凹坑和裂纹的扩展,从而使摩擦表面形貌得到改善,并通过改变摩擦表面层的结构使摩擦副的磨损性能得到显著提高。
2) ceramic additive
陶瓷添加剂
1.
The effect of a ceramic additive with the main composition of Al_4Si_4O_ 10 (OH)_8 in lubricating oil on the contact fatigue and wear performance of steel/steel friction pair was investigated on a ball-rod contact fatigue tester.
利用球-棒疲劳试验机进行试验,证明该陶瓷添加剂提高了摩擦副接触疲劳寿命L101。
3) metal additive
金属添加剂
1.
Influence of metal additives on properties of supported Ni-B amorphous alloy catalysts for hydrogenation of o-chloronitrobenzene to o-chloroaniline;
金属添加剂对Ni-B非晶态合金催化剂邻氯硝基苯加氢性能的影响
2.
As the result of the study on the effects of copper powder, reduction iron powder, cast iron powder and other relative metal additives used for ELID grinding wheel manufacturing, a new kind of grinding wheel is presented for ELID grinding and experimental results shows that such a grinding wheel has its great advantage and can be used for production purpose.
采用铜粉、还原铁粉、铸铁粉并辅以改善铁粉和铸铁粉末冶金性能的金属添加剂做配方，烧制出适合现有生产条件的ＥＬＩＤ磨削用砂轮磨块，性能检验表明该配方满足了ＥＬＩＤ磨削要
4) metallic additive
金属添加剂
1.
Influences of metallic additive on microstructures and interface-bonding of ceramic-lined composite pipes fabricated by the SHS process;
金属添加剂对SHS陶瓷内衬复合管微观结构与界面连接的影响
5) cermet cements
陶瓷金属粘固剂
6) nanometal additive
纳米金属添加剂
1.
In reference to ASTM water accommodation friction (WAF) for preparing ecotoxic testing sample solution,the ecotoxicity of four kinds of nanometal additives(Cu,Al,Zn,Ti) were inspected and evaluated by applying luminescent bacteria.
采用发光细菌毒性测试技术,参照ASTM的WAF方法制备油类生物毒性测试样品液,对Cu、A、lZn、Ti 4种纳米金属添加剂的生物毒性进行了检测与评价。
补充资料：含二氧化硅金属陶瓷
分子式：
CAS号：
性质：由二氧化硅陶瓷和金属或合金组成的复合材料。二氧化硅呈颗粒状，粒度200目，通常还加人体积含量为2%～7%的氧化铝，基体金属通常由铜、锌、锡、铅、铁等组成，同时加入弥散的石墨为润滑剂。采用粉末冶金技术制造。主要用作离合器和刹车装置等的摩擦材料。
CAS号：
性质：由二氧化硅陶瓷和金属或合金组成的复合材料。二氧化硅呈颗粒状，粒度200目，通常还加人体积含量为2%～7%的氧化铝，基体金属通常由铜、锌、锡、铅、铁等组成，同时加入弥散的石墨为润滑剂。采用粉末冶金技术制造。主要用作离合器和刹车装置等的摩擦材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条