1)  purging bubble tank
鼓泡器
2)  air-lift agitator
空气鼓泡器
3)  Blister
鼓泡
1.
Blister were observed in the surface of square pipe after being hot zinc-plated.
方管表面热镀锌后出现不同程度的鼓泡现象。
4)  bubble
鼓泡
1.
The number of bubble after first heat treatment is reduced by CIP processing which can improve the uniformity of Jr along the longitudinal direction to be more suitable for the fabrication of long Bi-2223/Ag tapes.
结果表明:采用压棒装管工艺提高了带材芯丝的填充系统,有利于提高带材的工程电流密度;第一次热处理后带材表面的鼓泡明显比松装带材少,有利于提高电流沿长度方向上的均匀性,更适合制备长带。
2.
In order to predigest experiment and save energy, material and time, bubble factors of Bi-2212 tape were studied systematically by grey theory.
为了简化实验,达到节能、节材及节时的目的,利用灰色理论系统地研究了Bi-2212带材鼓泡的影响因素。
5)  bubbling
鼓泡
1.
Study on the Bubbling Enhancement of Microfiltration in Submerged Hollow Fiber Membrane Module;
鼓泡对浸没式中空纤维膜微滤过程强化作用的研究
2.
Factors of bubbling in operation process of ionic membrane were analysed and enumerated.
分析并列举了离子交换膜在使用过程中鼓泡的原因,阳极液质量浓度;pH值;阴极液质量浓度;电流密度;开停车及盐水质量等因素都可以造成膜鼓泡,形成针孔。
3.
The effects of liquid property and orifice diameter on bubbling were investigated using maximal scale intensity.
运用小波能谱分析中的能量最大准则,对双头电导探针前针在单孔鼓泡口测得的时间序列进行了分析,并用最大尺度强度考察了液体性质和鼓泡口直径对鼓泡过程的影响。
6)  bubble column
鼓泡床
1.
Experiment and CFD simulation of bubble size distribution in 2D gas-liquid bubble column;
二维鼓泡床内气泡尺寸分布的实验与CFD模拟
2.
Modeling of liquid circulation in gas-liquid bubble columns;
气液鼓泡床内的液体流速分布
3.
Comparison of bubble behavior between single orifice and porous spargers air-water bubble columns;
单孔及微孔曝气低气速鼓泡床内气泡行为比较
参考词条
补充资料：鼓泡器
分子式：
CAS号：

性质： 利用压缩空气或蒸汽的搅拌器。当将压缩空气或蒸汽通入液体时，就因鼓泡而发生搅拌作用。当该液体需要加热时，通入蒸汽更为恰当。置于液体中的起泡器，通常由水平的直管或环形管组成，管上有3～6mm的小孔，压缩空气或蒸汽由孔中逸出时即鼓泡搅拌液体。设备简单，特别适用于化学腐蚀性强的液体。但搅拌效率低，消耗动力多，且须注意液体不与空气或蒸汽发生作用，以免引起损失。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。