3) electronic cabinet
电子机柜
1.
Production of electronic cabinet by Booster Vacuum Casting;
用真空加压铸造法生产电子机柜
2.
Structural Design and Optimization of a Plug-in Chassis in Electronic Cabinet;
电子机柜分机的结构优化设计
3.
Focusing on the conditions of shipboard electronic cabinet as well as its electrical and mechanical characteristics,this paper presents the necessity of the light-duty design for shipboard electrionic equipment.
结合舰载电子机柜工作环境条件及其本身的电气、结构特点,简要介绍舰载装备轻型化的必要性。
4) electronic shoe cupboard
电子鞋柜
1.
A novel multifunction electronic shoe cupboard was developed.
研制一款新颖的多功能电子鞋柜,它由稳压电源、控制器和外围电路三部分组成。
5) electrical cabinet
电气柜
1.
Strength and modal analysis of electrical cabinet based on ANSYS;
基于ANSYS的电气柜体强度与模态分析
6) electronic cabinet
电子柜
1.
The expert system based on fault tree is selected for the diagnosis of electronic cabinet faults, after analysis of the compositionand fault formation mechanism of the electronic cabinet.
通过分析机车电子柜的组成和故障形成机理,选择基于故障树的专家系统作为电子柜故障诊断的技术手段。
2.
The electronic cabinet is the core control device of the SS4 modified electric locomotive, the fault of which will cause deviant operation of electric locomotive, therefore, it is of great significance to make sure the electronic cabinet works normally for the safe operation of electric locomotive.
电子柜是SS4改型电力机车的核心控制设备，其故障将直接影响电力机车的正常运行，因此，确保电子柜正常工作对电力机车的安全运行具有重要的意义。
3.
The TPZ27 electronic cabinet is the core control device of SS4 modified electric locomotive, in which the fault will affect the normal operation of electric locomotive.
安全是铁路运输质量的重要保证,TPZ27型电子柜是SS4G电力机车的核心控制设备,其故障将直接影响电力机车的正常运行,确保电子柜正常工作对电力机车安全运行意义重大,因此需要开发TPZ27型电子柜故障诊断系统。
补充资料：厂用电受电
厂用电受电
energizing of auxiliary power system
chongyongd一on sho一Jd一on厂用电受电(energizing of auxiliary powersystem)机组附属设备安装完毕后需通电试运行，所需厂用电源由外部供给，因此厂用电受电是调试工作开始的标志。 受电步骤新建电厂先由电力系统向变电站供电，再依次对高压起动/备用变压器、3~10kv厂用配电装置、厂用工作变压器及380V配电装置供电。扩建电厂因高压起动/备用变压器已经投人运行，故可利用它的电源对扩建的厂用配电装置等供电。 调试项目主要有:①用额定电压依次对空载线路、变电站母线、隔离开关、断瘩器、互感器、变压器及厂用配电装置等进行冲击合闸试验。有条件时.冲击合闸前应先进行递升加压试验。升压过程中注意检查各设备有无放电声及短路现象，发现问题及时处理后再进行升压。②检查三相电压应平衡，相序应正确，各段母线的相位彼此应一致。对配电装置供电时，有时会由于母线电容和与母线连接的电磁式电压互感器的电感相互作用而出现铁磁谐振，此时相电压升高，中性点明显位移。为消除谐振可在电压互感器的剩余电压绕组处并联电阻以去振。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条