1)  current statistical model
机动“当前”模型
1.
It utilizes the current statistical model and brings out Kalman filter method as the primary arithmetic in the target tracking system.
采用机动“当前”模型对被动声探测目标进行了建模,并提出了采用Kalm an滤波算法作为目标跟踪的主要算法,给出了仿真算法的详细设计流程。
2)  maneuvering
机动
1.
According to the randomness in the process of missile maneuvering , sets up the mathematical model for missile maneuvering path planning, designs the Genetic Algorithm problem-solving policy, realizes the mission of maneuvering path planning in the given time, an example is given in the last.
根据导弹作战机动过程各路段机动时间随机性特点,运用随机规划理论建立了导弹机动任务规划的数学模型,设计了遗传算法求解策略,实现了在一定时间内合理地规划机动路线的任务,并通过算例作了说明。
2.
When tracking maneuvering reentry vehicles,an ex- tended Kalman filter with maneuvering reentry vehicle(MaRV) model is usually used in a traditional method.
对于目标发生机动时的再入飞行器的跟踪问题,传统跟踪方法是采用机动模型的扩展卡尔曼滤波。
3.
Because of many potential advantages in maneuvering ability,stealthy characteristic,flight performance,destroying efficiency and other aspects,asymmetric cross-section vehicle has been developed and studied widely.
非圆截面弹身布局在高超声速再入飞行器的机动能力、隐身特性、飞行性能和毁伤效能等方面具有许多潜在的优势,是当前飞行器设计的一个重要发展方向。
3)  Maneuver
机动
1.
The Application of Adaptive Kalman Filter for the Autonomous Orbit Determination of Maneuver Target;
基于自适应卡尔曼滤波的机动目标自主轨道确定
2.
Research of missile random maneuver strategy;
导弹随机机动策略的研究
3.
Trajectory Planning and Control for Satellite Formation Flying Maneuver of Leaving ana Joining;
卫星进入和离开编队机动轨迹规划及控制
4)  vehicle
机动车
1.
The Contrast of Methods for Vehicle Tail Gas Exhaust Test;
机动车尾气排放检测方法对比分析
2.
Full-flow dilution tunnel sampling system for articulate matters from vehicle emission—its integration,flowrate control and adjustment;
全流稀释风道机动车排放颗粒物采集系统的集成及其流量控制和调节
3.
Spatio-temporal distribution simulation of vehicle exhaust pollution using CALINE4 dispersion model——taking the main streets of Xiamen as an example;
应用CALINE4模式模拟机动车排气污染的时空分布——以厦门市主干道路为例
5)  Automobile
机动车
1.
Automobile Exhaust Gases Pollution in Nanjing;
南京市机动车排气污染现状分析
2.
The Comprehensive Control on Automobile Emission in Metropolis;
综合治理城市机动车的排气污染
3.
Callback and Reuse of Automobile Antifreeze Coolant;
机动车防冻冷却液的回收利用
6)  motor vehicle
机动车
1.
Development of TY-1 type motor vehicles polish cleaner;
TY-1型机动车擦亮去污剂的研制
2.
The characteristics of volatile organic compounds(VOCs) emitted from motor vehicle in Beijing;
北京市机动车排放挥发性有机化合物的特征
3.
Analysis of trial effect of waste gas purification products on motor vehicles;
机动车尾气净化产品的试用效果分析
参考词条
补充资料:AutoCad 教你绘制三爪卡盘模型,借用四视图来建模型
小弟写教程纯粹表达的是建模思路,供初学者参考.任何物体的建摸都需要思路,只有思路多,模型也就水到渠成.ok废话就不说了.建议使用1024X768分辨率

开始
先看下最终效果




第一步,如图所示将窗口分为四个视图




第二步,依次选择每个窗口,在分别输入各自己的视图




第三步,建立ucs重新建立世界坐标体系,捕捉三点来确定各自的ucs如图




第四步,初步大致建立基本模型.可以在主视图建立两个不同的圆,在用ext拉升,在用差集运算.如图:




第五步:关键一步,在此的我思路是.先画出卡爪的基本投影,在把他进行面域,在进行拉升高度分别是10,20,30曾t形状.如图:




第六步:画出螺栓的初步形状.如图




第七步:利用ext拉升圆,在拉升内六边形.注意拉升六边行时方向与拉升圆的方向是相反的.
之后在利用差集运算





第八步:将所得内螺栓模型分别复制到卡爪上,在利用三个视图调到与卡爪的中心对称.效果如图红色的是螺栓,最后是差集




第九步:阵列




第10步.模型就完成了




来一张利用矢量处理的图片


说明:补充资料仅用于学习参考,请勿用于其它任何用途。