1) T.simplex
箭头唐松草
1.
As to the explants of T.
以箭头唐松草的茎段作为外植体接种到附加不同生长物质的培养基中,诱导其成为完整植株。
2) Thalfetetidine
箭头唐松草碱
3) thalictrum
[英][θə'liktrəm] [美][θə'lɪktrəm]
唐松草属
1.
Thalictrum fortunei var. bulbiliferum (Ranunculaceae),a new variety from Jiangsu,China;
江苏唐松草属(毛茛科)一新变种——珠芽华东唐松草
2.
The ITS sequences and the 5S rRNA spacer region of Ranunculaceae Thalictrum simplex and other kindred plants including Coptis Chinensis,Ranunculus japonicus and Paeonia suffruticosa were cloned and anolgied.
)及其近缘植物黄连、毛茛和芍药科的牡丹等植物的ITS序列和5S rRNA基因间隔区的克隆、扩增及构建系统发育树的分析研究,结果显示,唐松草扩增后ITS序列长607 bp,5SrRNA基因基因间隔区序列长323 bp;系统树证明唐松草属与黄连属和毛茛属的亲缘关系较近,结合形态学与化学等其它学科证据,本研究结论支持唐松草和黄连在进化上更接近,为含木兰花碱生物碱及毛茛甙植物的鉴别以及毛茛科相关植物的亲缘关系初步提供了分子依据。
3.
One species and one variety of Aconitum and Delphinium each, one species of Thalictrum, one subspecies of Adonis, and five species of Ranunculus are described as new.
在本文中描述了乌头属和翠雀属各一新种和一新亚种,唐松草属一新种,侧金盏花属一新亚种,以及毛茛属五新种;首次报道了圆叶唐松草在中国西藏南部的分布,在对叶、雄蕊和心皮的形态特征进行了分析之后认为,这种植物与特产云南的糙叶唐松草有一定亲缘关系。
4) Thalictrum aquilegifolia
唐松草
1.
Tissue Cuture and Rapid Propagation of Thalictrum aquilegifolia;
唐松草的组织培养与快速繁殖技术
5) thalictrine
[θə'liktrin]
唐松草碱
6) Thalictrum acutifolium (Hand. Mazz.) Boivin
尖叶唐松草
1.
A novel ether linkaged bisalkaloid, acutiaporberine(Ⅰ) , was isolated from the root of Thalictrum acutifolium (Hand.
从尖叶唐松草〔Thalictrum acutif olium( Hand。
补充资料：在cad中直接画箭头
在中CAD中直接画箭头的命令的一个方法！！！
众所周知，在天正中可直接绘制箭头，而在AutoCAD中不得。最近我发现一个在命令行直接输入命令就可画出你想要的尺寸的箭头的方法，具体实施如下：
1、首先拷贝下列lisp程序，用ar为名以记事本格式保存，然后改后缀名为.lsp，作为一个lisp程序文件；程序如下：
(defun ureal (bit kwd msg def / inp)
(if def
(setq msg (strcat "\n" msg "<" (rtos def) ">: ")
bit (* 2 (fix (/ bit 2)))
)
(if (= " " (substr msg (strlen msg) 1))
(setq msg (strcat "\n" (substr msg 1 (1- (strlen msg))) ": "))
(setq msg (strcat "\n" msg ": "))
)
)
(initget bit kwd)
(setq inp (getreal msg))
(if inp inp def)
)
(defun upoint (bit kwd msg def bpt / inp)
(if def
(setq pts (strcat
(rtos (car def))
","
(rtos (cadr def))
(if
(and (caddr def) (= 0 (getvar "FLATLAND")))
(strcat "," (rtos (caddr def)))
""
)
)
msg (strcat "\n" msg "<" pts ">: ")
bit (* 2 (fix (/ bit 2)))
)
(if (= " " (substr msg (strlen msg) 1))
(setq msg (strcat "\n" (substr msg 1 (1- (strlen msg))) ": "))
(setq msg (strcat "\n" msg ": "))
众所周知，在天正中可直接绘制箭头，而在AutoCAD中不得。最近我发现一个在命令行直接输入命令就可画出你想要的尺寸的箭头的方法，具体实施如下：
1、首先拷贝下列lisp程序，用ar为名以记事本格式保存，然后改后缀名为.lsp，作为一个lisp程序文件；程序如下：
(defun ureal (bit kwd msg def / inp)
(if def
(setq msg (strcat "\n" msg "<" (rtos def) ">: ")
bit (* 2 (fix (/ bit 2)))
)
(if (= " " (substr msg (strlen msg) 1))
(setq msg (strcat "\n" (substr msg 1 (1- (strlen msg))) ": "))
(setq msg (strcat "\n" msg ": "))
)
)
(initget bit kwd)
(setq inp (getreal msg))
(if inp inp def)
)
(defun upoint (bit kwd msg def bpt / inp)
(if def
(setq pts (strcat
(rtos (car def))
","
(rtos (cadr def))
(if
(and (caddr def) (= 0 (getvar "FLATLAND")))
(strcat "," (rtos (caddr def)))
""
)
)
msg (strcat "\n" msg "<" pts ">: ")
bit (* 2 (fix (/ bit 2)))
)
(if (= " " (substr msg (strlen msg) 1))
(setq msg (strcat "\n" (substr msg 1 (1- (strlen msg))) ": "))
(setq msg (strcat "\n" msg ": "))
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条