1) compaction temperature
击实温度
1.
The different asphalt content mixtures are shaped at different compaction temperature,the relationship of compaction temperature to physical-mechanical parameters is researched in the paper.
对不同沥青含量的沥青混合料在不同击实温度下击实成型,研究击实温度与混合料各物理力学参数之间的相关关系。
2.
The relationship between the compaction temperature and the density of asphalt mixtures was investigated,and the relationship was analyzed by studying a large number of marshall tests at different temperatures on asphalt mixtures with two aggregate gradations.
对两种级配的沥青混合料在不同击实温度下进行了大量的马歇尔室内试验,分析统计结果显示:击实温度在很大程度上对密度和空隙率是有影响的。
3.
Based on results of a large number of Marshall tests at different temperatures on asphalt mix?tures with various aggregate gradations, this paper summarizes the effects of compaction temperature on air voids of asphalt mixtures.
通过对几种级配的沥青混合料在不同击实温度下进行了大量的马歇尔室内试验,总结出了沥青混合料的击实温度对混合料空隙率的影响。
2) optimal compaction temperature
最佳击实温度
1.
The optimal compaction temperature and Sasobit content were determined according to the two indices,which were 130 ℃ and 3% respectively.
5%)为控制指标,以Sasobit沥青混合料稳定度相对于普通沥青混合料稳定度提高幅度最大为辅助指标,确定了Sasobit沥青混合料的最佳击实温度为130℃和最佳Sasobit剂量为3%。
3) shock temperature
冲击温度
1.
In this paper,ways to calculate shock temperature are classified as three kinds of basic methods.
将冲击温度的计算归纳为三种近似方法，并对这三种方法进行了概述，同时还给出了一些材料参数的估算方法。
2.
The method of measuring shock temperature of metals is described.
介绍了金属冲击温度测量的基本方法，对金属冲击温度测量中存在的一些主要问题进行了分析和讨论。
3.
The experimental data of the Hugoniot, shock temperature and rarefaction velocity in HDG window were determined under the shock pressure of 7.
获得了76～160GPa压力范围内重玻璃Hugoniot参数、冲击温度和卸载声速的实验数据,声速测量不确定度小于2%。
4) Temperature Shock
温度冲击
1.
Temperature Shock Measuring System for Automobile Ignition Coil;
汽车点火线圈温度冲击测试系统
2.
The environment stress screen of cables outside of satellite has been tested against the temperature shocks of 200 ℃ temperature difference.
为考察航天器外露电缆能否承受低于-140℃的温度,特别是温差近200℃的温度冲击,进行了星用外露电缆线的环境应力筛选(ESS)试验工作。
3.
Combined with test parameter, analyzed the completed approach on the facility of temperature shock test.
结合试验指标要求,对温度冲击试验设备实现途径进行分析比较,选择两箱式作为试验设备的实现方式;对设备组成结构及制冷、加热流程进行阐述,并对温度冲击试验过程中两种制冷状态下的热负荷进行了分析计算。
5) thermal shock
温度冲击
1.
in the experiment of thermal shock.
本文以高聚物粘结炸药为研究对象,利用声发射技术监测温度冲击和力学性能试验过程中材料内部的损伤演变,研究损伤演变特征、温度冲击损伤对力学性能的影响和高聚物粘结炸药的声发射特性。
补充资料：铂电阻温度表(见电阻温度表)
铂电阻温度表(见电阻温度表)
表。bod旧nZu wendubiao铂电阻温度表见电阻温
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条