1) Reciprocating nitrogen compressor
活塞式氮压机
2) piston type air compressor
活塞式空压机
1.
Exploratory investigation on spontaneous combustion of carbon accumulation in piston type air compressor;
活塞式空压机积炭自燃问题的探讨
3) piston compressor
活塞式压缩机
1.
Cause of crack of 6M50 piston compressor crankshaft and its modification;
6M50型活塞式压缩机曲轴的开裂原因及改造
2.
Development of the DAS of Piston Compressors;
活塞式压缩机数据采集系统开发
3.
A BRIEF DISCUSSION ON THE IMPROVEMENT FOR THE OPERATING CONDITIONS OF PISTON COMPRESSOR;
浅谈活塞式压缩机运转条件的改善
4) reciprocal compressor
活塞式压缩机
1.
In this article, with respect to the refrigerating system with ammonia as refrigerant and with reciprocal compressor as refrigerating machine, the harm resulted from vibration and the causes to induce vibration were first described.
简述了以氨作为制冷剂,活塞式压缩机作为制冷动力的制冷系统中,振动产生的危害和振动产生的原因。
2.
The paper tells of the regulating principle, method, framework and experimental results of the regulating backflow valve for reciprocal compressor.
介绍了活塞式压缩机可调回流气阀的调节原理、方法和调节机构及其实验结果。
5) piston compressor
活塞式压气机
1.
Development and application of a performance test system for piston compressor;
活塞式压气机性能测试实验台的研制与应用
6) reciprocating compressor
活塞式压缩机
1.
Research on CAD parameter design in reciprocating compressor desing;
活塞式压缩机参数化绘图软件的研制
2.
Computerized testing system of reciprocating compressor indicator card;
活塞式压缩机示功图计算机评测系统
3.
Calculation Method of the Gas Pole Immanence Frequency in the Design of the Pipelines of a Reciprocating Compressor;
活塞式压缩机管路设计中气柱固有频率的计算方法
补充资料：辅助活塞式铸压
分子式：
CAS号：
性质：是传递模塑的一种，也可称为活塞式铸压(plunger moulding)。其特点是所用压机具有两个液压操纵的活塞，分别称为主活塞和辅助活塞。前者用作锁紧模具，后者用作挤压塑料。模塑时，主活塞锁紧塑模的力至少应比分离塑模的力(等于阴阳模分界面上制品、分流道和主流道等截面的总和与塑料承受压力的乘积)大10％
CAS号：
性质：是传递模塑的一种，也可称为活塞式铸压(plunger moulding)。其特点是所用压机具有两个液压操纵的活塞，分别称为主活塞和辅助活塞。前者用作锁紧模具，后者用作挤压塑料。模塑时，主活塞锁紧塑模的力至少应比分离塑模的力(等于阴阳模分界面上制品、分流道和主流道等截面的总和与塑料承受压力的乘积)大10％
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条