1) Centrifugally cast filled glass fiber reinforced unsaturated polyester resin pipes
离心浇铸玻璃钢夹砂管
2) grit-mixed glass fiber plastic pipeline
夹砂玻璃钢管
1.
Application of grit-mixed glass fiber plastic pipeline in reservoir dam;
夹砂玻璃钢管在水库大坝旧输水洞衬砌中的应用
3) glass reinforced plastic mortar pipe
玻璃钢夹砂管
1.
By means of field test and analysis on the section of glass reinforced plastic mortar pipe (GRPMP), a concise empirical formula was obtained, which was suitable for the construction of slurry pressure balance type GRPMP by using jacking method.
通过对试验段进行现场测试与分析,获得了简明的适合于泥水平衡式玻璃钢夹砂管顶管施工的经验公式。
2.
At present, in the developed area of China, the using of glass reinforced plastic mortar pipe is growing.
玻璃钢夹砂管作为一种柔性的非金属复合材料管道,将其应用于地下给排水管道顶管工程具有重量轻、耐腐蚀、摩阻系数小、寿命长、管道和接口抗渗强度高等优点。
4) sand sandwiched GRP pipe
玻璃钢夹砂管
1.
The sand sandwiched GRP pipe is a new type of composite pipe in the seventies of last century.
玻璃钢夹砂管为20世纪70年代的一种新型复合管材。
2.
Traditional sand sandwiched GRP pipes with large diameter require four courses of gasket at the socket end and it is difficult to make the casing.
传统的大口径玻璃钢夹砂管插承口需四道密封圈,套管(筒)制作困难。
5) glass fibre reinforced plastic mortar pipe(FRMP)
玻璃钢夹砂管
1.
In the sewage project of Nanzhou Road,a mechanical construction technology with equilibrium of slurry and soil was used for the construction of glass fibre reinforced plastic mortar pipe(FRMP) of the definite-length-winding for pipe jacking.
在南洲路污水管道工程中,采用泥水平衡机械施工技术进行了定长缠绕玻璃钢夹砂管顶管施工。
6) GRP sand pipe
玻璃钢夹砂管
1.
Installation technology and application of the long-distance grp sand pipe;
长距离玻璃钢夹砂管安装技术与应用
2.
drainage pipe and field test of GRP sand pipe construction technology, we draw the conclusion that GRP pipe is applicable for drainage pipe of port engineering.
通过对玻璃钢夹砂管与钢筋混凝土排水管的综合性能比较及对玻璃钢夹砂管施工工艺的现场测试,得出“玻璃钢夹砂管完全适用于港口工程的排水管道”的结论。
3.
Large diameter GRP sand pipe used in Changjiang Water Diversion Project (III) is paved for the first time in the soft ground.
长江引水三期工程采用大口径玻璃钢夹砂管,是首次在软土地基上敷设。
补充资料：离心浇铸
分子式：
CAS号：
性质：用液体胶料或胶乳注入模型制造橡胶制品是简便低耗的生产方法，离心浇铸法将胶料旋转产生离心力，使胶料均匀分布在旋转模具内壁上，浇铸毕将模具移入烘房固化后即得制品。离心浇铸用设备简单，浇铸制品尺寸不受限制，浇铸质量比常压浇铸的好，应用较广。此法最适用于薄片状、圆筒状和形状复杂的制品。
CAS号：
性质：用液体胶料或胶乳注入模型制造橡胶制品是简便低耗的生产方法，离心浇铸法将胶料旋转产生离心力，使胶料均匀分布在旋转模具内壁上，浇铸毕将模具移入烘房固化后即得制品。离心浇铸用设备简单，浇铸制品尺寸不受限制，浇铸质量比常压浇铸的好，应用较广。此法最适用于薄片状、圆筒状和形状复杂的制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条