1) air-bearing simulation
气浮台仿真
2) simulation platform
仿真平台
1.
Design and Implementation of Simulation Platform on the Liquid Infiltration-extrusion Process for Fabrication of MMC(Metal Matrix Composites);
液-固挤压复合材料工艺仿真平台设计与实现
2.
Design and implementation of simulation platform for networked control systems;
网络控制系统仿真平台的设计与实现
3.
An extensible propulsion simulation platform:Part Ⅱ-extensible framework;
可扩展的推进系统仿真平台:部分Ⅱ-可扩展的框架结构
3) simulating platform
仿真平台
1.
Aiming at the profound reform of testing and fault diagnosis architecture,this paper put forward a new idea of constructing fault diagnosis simulating platform after the data bus technology has been applied to the missile control system.
针对应用总线后导弹控制系统测试及故障诊断体制发生的深刻变革,提出了建立故障诊断仿真平台的思想。
2.
The developed graphics interaction program of middlesize RoboCup league simulating platform is introduced.
介绍了中型组机器人足球比赛仿真平台的图形交互程序。
4) simulation turntable
仿真转台
1.
Research on model of pointing error of a three-axis simulation turntable;
轴仿真转台指向误差的建模研究
2.
A robust-optimal controller design method is proposed based on T-S fuzzy model to deal with the nonlinear and uncertainty problems on the flight simulation turntable system.
针对飞行器仿真转台系统的非线性以及不确定性问题,提出了基于T-S模糊模型的鲁棒最优控制器设计方法。
3.
In order to avoid the unbalanced gravity load during the simulation of large-scale aircrafts,a hollow electro-hydraulic servomotor for the simulation turntable is designed and manufactured.
针对大体积飞行器仿真试验时的重力偏载情况,设计制造了一种仿真转台用中空式电液伺服马达。
5) Simulation table
仿真转台
1.
Following them,the composing of the dynamic performance testing system particularly,include 3-axis electro-motion flight simulation table,interface conversion card,laser pointer and screen are discussed in detail and the method that tests the dynamic performance measurement is presented.
简要介绍了稳定平台系统功能和主要技术指标,详细介绍了机载SAR稳定平台动态性能测试系统组成,包括三轴电动飞行仿真转台系统、接口转换卡、激光笔、屏幕。
2.
Mode updating and analysis utilizing finite element analyse software was carried out on a certain type of simulation table frame on the basis of optimization goal of guaranteeing the frame rigidity and reducing its inertia.
针对某型号仿真转台台体框架,基于保证框架刚度和降低框架转动惯量的优化目标,利用有限元分析软件对其进行模态分析和模态修正,得到了框架各方向一阶固有振型频率基本一致的优化结果。
3.
This paper has a research on servo oil-source system included in the integrated design of simulation table, and finally checks its solutions.
本文针对仿真转台总体设计方案中伺服油源系统进行研究并验证解决策略。
6) Simulator
[英]['sɪmjuleɪtə(r)] [美]['sɪmjə'letɚ]
仿真转台
1.
Research on the Adaptive Model-following Control Based on SMC and FLC for Hydraulic Servosystem in Simulator;
仿真转台液压伺服系统自适应模型跟踪模糊变结构控制的研究
2.
Modeling of three axis simulator and decoupling control;
三轴仿真转台系统模型建立及解耦控制研究
3.
Design and Realization of Simulator s Computer Control System;
仿真转台计算机控制系统设计与实现
补充资料：国际仿真数学与仿真计算机学会
各国仿真数学和仿真计算机方面的学者和团体联合组成的国际性学术组织,缩写IAMCS。1955年成立。原名国际模拟计算机学会（IAAC），1976年改用现名。中国自动化学会系统仿真专业委员会代表中国参加这个学会。学会总部设在比利时的布鲁塞尔。学会的宗旨是促进计算机仿真方面的专家、制造厂和用户之间交流科学信息。该会接受个人会员和团体会员（包括有关的工厂、机关和研究所），并设有荣誉会员。每三年举行一次国际性大会。它是5个国际学会协调委员会（FIACC）成员之一。其他 4个是国际自动控制联合会(IFAC)、国际信息处理联合会（IFIP）、国际运筹学会联合会(IFORS)和国际测量联合会（IMEKO）。学会出版物有：《IAMCS会议录》，《IAMCS会刊（仿真数学与仿真计算机）》和《IAMCS会刊（应用数值数学）》。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条