1) strain sensing
应变传感
1.
Temperature and strain sensing property of grapefruit microstructure fiber Bragg grating;
柚子型微结构光纤Bragg光栅温度和应变传感特性研究
2.
Investigation of strain sensing property of phased-shifted fiber Bragg grating;
相移光纤光栅应变传感特性的实验研究
3.
Experimental study on the strain sensing for fiber Bragg grating;
光纤布拉格光栅的应变传感实验的研究
2) strain sensor
应变传感
1.
A novel fiber strain sensor based on laser s transient regime;
基于激光器激射特性的新型应变传感系统
2.
By a simple sensor system and the intensity demodulation method of matched fiber Bragg grating, the fiber Bragg grating strain sensor is studied theoretically and experimentally.
采用一种简单的传感装置和匹配光纤光栅强度解调的方法 ,对光纤光栅应变传感进行了理论分析和实验研究 。
3.
In the optical fiber grating sensor parts,the transfer matrix method was used to analyse the characteristic properties of optical fiber Bragg grating and its strain sensor sensitivity,temperature sensor sensitivity,and introduce the technology which could solve problem of strain and temperature cross-sensitivity.
在光纤光栅传感部分,用传输矩阵法分析了光纤Bragg光栅的一些主要参数,推导和分析了光纤Bragg光栅的温度和应变传感特性,并介绍了解决交叉敏感问题的技术。
3) Strain sensor
应变传感器
1.
Investigation into new optical-fiber-grating strain sensors based on temperature compensation;
具有温度自补偿功能的新型光纤光栅应变传感器的研究
2.
MEMS capacitive strain sensor;
MEMS电容应变传感器
3.
Investigation on optimal placement of strain sensor;
应变传感器优化配置研究
5) Strain sensors
应变传感器
1.
In this paper, the sources of errors and disadvantages of several temperature compensated optical fiber strain sensors are analyzed.
分析了几种具有温度补偿的光纤应变传感器测量应变的误差来源及缺点，由此加以推广，提出了具有温度补偿的高精度单参量光纤传感器的思想。
2.
The strain sensors under the bridge are used to measure the bridge strain when the vehicle moving across the bridge,and the integral operation is used to eliminate the effect of the vehicle vibration to get the moving vehicle load.
利用安装在桥梁下面的应变传感器测量车辆经过桥面引起的桥梁应变,通过积分运算消除车辆振动对计算结果的影响,进而获得动态车辆的载重值。
3.
The key issue on optimal placement of strain sensors inside the steel beam of cable-stayed bridge was studied for the purpose of the safety evaluation using the structural health monitoring system.
该文以润扬大桥斜拉桥钢箱梁结构为研究对象,针对结构安全评估为目标的大跨桥梁结构健康监测系统中应变传感器的优化布置问题,提出了一个基于桥梁结构多尺度模拟和结构响应分析结果进行应变传感器优化布置的方法。
6) strain gauge
应变传感器
1.
Asphalt Pavement Strain Gauge Data Collection and Signal Process
沥青层应变传感器数据采集及处理方法研究
2.
This paper presents an experimental study on the stress transfer and fatigue performance of TIG (Tungsten Inert Gas arc) spot welding flake strain gauge.
对氩弧点焊薄片应变传感器传递性能和疲劳性能进行了试验研究,试验结果表明氩弧点焊薄片应变传感器具有稳定传递性能和可靠的疲劳性能,可以应用于实际工程应变测量。
补充资料：电阻应变式传感器
以电阻应变计为转换元件的电阻式传感器。电阻应变式传感器由弹性敏感元件、电阻应变计、补偿电阻和外壳组成，可根据具体测量要求设计成多种结构形式。弹性敏感元件受到所测量的力而产生变形，并使附着其上的电阻应变计一起变形。电阻应变计再将变形转换为电阻值的变化，从而可以测量力、压力、扭矩、位移、加速度和温度等多种物理量。常用的电阻应变式传感器有应变式测力传感器、应变式压力传感器、应变式扭矩传感器（见转矩传感器）、应变式位移传感器（见位移传感器）、应变式加速度传感器（见加速度计）和测温应变计等。电阻应变式传感器的优点是精度高，测量范围广,寿命长,结构简单，频响特性好，能在恶劣条件下工作，易于实现小型化、整体化和品种多样化等。它的缺点是对于大应变有较大的非线性、输出信号较弱，但可采取一定的补偿措施。因此它广泛应用于自动测试和控制技术中。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条