1) vibratory compaction molding
振动压实成型
1.
This paper analyzes the effect of molding methods on asphalt stabilized macadam performance by gyratory compaction molding,vibratory compaction molding and large Mashell molding methods,and the Mashell indexes with different molding methods are also compared.
研究了采用旋转压实成型法、振动压实成型法和大型马歇尔击实成型法对沥青稳定碎石性能的影响,同时进行了不同方法下各项马歇尔指标的对比分析,并以目前沥青混合料的技术指标为基础,提出了基于不同成型方法的设计指标,研究发现采用不同成型方法的指标具有一致性。
2) vibrating compaction
振动压实
1.
Analysis of dynamic stress response of lower course by moving-vibrating compaction on semi-rigid base;
半刚性基层振动压实时的下承层动力响应分析
2.
Analysis of continuous dynamic monitoring on vibrating compaction process of graded broken stone;
级配碎石振动压实过程的连续动态监控分析
3.
Methodological study of dynamic monitoring for vibrating compaction of gravel soils;
碎石土振动压实动态监测方法研究
3) vibration compaction
振动压实
1.
Indoor test on physical-mechanical properties of loess under vibration compaction;
黄土室内振动压实特性试验
2.
Experimental research on transforming characteristics and compaction mechanism of rockfill under the process of vibration compaction;
填石料的振动压实变形特性及压实机理试验研究
3.
Study on affect factor of vibration compaction effect of the eolian sand;
风积砂振动压实效果影响因素分析
4) vibratory compaction
振动压实
1.
Comparison of compaction test between oscillatory compaction and vibratory compaction;
振荡压实与振动压实压实效果对比试验研究
2.
In order to study the indoor vibratory compaction test methods,the paper studied the influence regularity of amplitude to vibratory compaction effect of Silt Soil and cement-stabilized crushed stone by the self-designed vibratory compaction instrument.
振动压路机的振幅是影响道路压实效果的重要因素,为研究室内路用材料振动压实试验方法,利用自行研制的振动压实仪,对在不同振幅振动压实条件下,粉土和水泥稳定碎石材料的压实效果进行了较为深入的研究。
3.
Using vibratory compaction technology can be achieved good paving quality,for the characteristics of surface\'s roughness and large specific surface area of recycled aggregate formation.
对于再生集料外观不平整、比表面积大的特性,采用振动压实的工艺能取得比较好的摊铺效果;但是碾压遍数、含水量、养护等方面的差异对水泥稳定碎石的影响非常大;合理的级配和水泥剂量对水泥稳定碎石抗裂性能有较大的影响。
6) vibrating compaction
振动成型
1.
In order to establish the transforming relation between modified proctor compaction method(MPCM) and vibrating compaction method(VCM),three types of graded crushed aggregate performance were compared between the VCM and MPCM.
为建立振动成型和击实成型的转换关系,进行了3类典型级配碎石在振动和击实成型下的对比试验。
补充资料：半干压成型法
分子式：
分子量：
CAS号：
性质：陶瓷、砖瓦和耐火材料成型法的一种。将配合料和较少量的水（8%-14%）拦匀，装入压力机的模型内，在较高压力下压制或捣打成生坯。制品尺寸准确，机械强度高。广泛用于成型标准尺寸的或简单异型的耐火制品、砖瓦和瓷砖等制品。
分子量：
CAS号：
性质：陶瓷、砖瓦和耐火材料成型法的一种。将配合料和较少量的水（8%-14%）拦匀，装入压力机的模型内，在较高压力下压制或捣打成生坯。制品尺寸准确，机械强度高。广泛用于成型标准尺寸的或简单异型的耐火制品、砖瓦和瓷砖等制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条