1) cyclic simple shear test
循环单剪试验
1.
Comparison beween the model’s theoretical forecast and the cyclic simple shear test results proves the reliability of the model,and comparison between the model’s theoretical forecast and the Masing’s rule-based models indicates the advantage of the novel model,which can reflect the impact of damping ratio of soil on its dynamic response truly.
理论预测结果与循环单剪试验结果的比较,说明了模型的可靠性。
2) cyclic shear test
循环剪切试验
1.
The static triaxial-dynamic triaxial-torsional shear multi-function testing apparatus designed for soil experiment is used to carry out the monotonic shear test and cyclic shear test for clay under the conditions of unconsolidated and undrained to investigate the cyclic shear stress-strain relationship and shear strength behavior.
单调剪切试验表明剪切强度随应变速率的增加而增大,在双对数坐标下,剪切强度与应变速率之间近似地符合线性关系;循环剪切试验表明对于某一给定的初始剪应力,循环剪切强度大小是循环软化效应和应变速率效应共同作用的结果,结合单调剪切强度应变速率之间的对应关系,提出了近似消除速率效应的循环剪切强度归一化方法,通过归一化表明,不同循环次数的循环剪切强度与初始剪应力之间的试验数据点分布在一个狭窄区域内,通过一个二次方程即可拟合表示。
3) Cyclic torsional tests
循环扭剪试验
4) cyclic simple shear
循环单剪
1.
In this paper,the cyclic simple shear tests of the saturated soil of saturation 95 %,92 %,88 % and 83 % were carried out under the consolidation pressure of 50 kPa,100 kPa and 200 kPa respectively.
在50,100,200 kPa三种固结压力下分别对饱和度为95%,92%,88%,83%的饱和土样进行了循环单剪试验,得到了4种土样在3种固结压力下的最大动剪模量Gdmax和最大阻尼比Dmax,以及动剪模量比G/Gdmax-γ和阻尼比D/Dmax-γ归一化数值,并进行了对比分析。
2.
The cyclic simple shear tests of the saturated soil with saturation 95%,92%,88% and 83% were carried out under the consolidation pressure of 50 kPa,100 kPa and 200 kPa,respectively.
在50kPa、100kPa和200kPa 3种固结压力下分别对饱和度为95%、92%、88%和83%的土样进行了循环单剪试验,得到了该土样在4种饱和度、3种固结压力下的最大动剪模量Gdmax以及动剪模量比G/Gdmax-γ归一化曲线。
3.
Furthermore,undisturbed samples of each layer soil are taken out,and the maximum dynamic shear modulus is obtained by laboratory cyclic simple shear tests.
此外,取出了场地各层土的原状土样,进行了室内循环单剪试验,获得了各层土的动剪模量,并与剪切波速的计算结果进行了比较分析。
5) drained cyclic torsional shear test
排水循环扭剪试验
1.
The soil static and dynamic universal triaxial and torsional shear apparatus is employed to perform drained cyclic torsional shear tests of saturated Fujian standard sand under initial conditions of isotropic consolidation or three-directional anisotropic consolidation.
利用土工静力-动力液压三轴-扭转多功能剪切仪,针对饱和福建标准砂,在各向均等与三向非均等固结条件下,进行了排水循环扭剪试验。
6) cyclic combined shear tests
循环耦合剪切试验
补充资料：装箱单、重量单、尺码单
装箱单、重量单、尺码单
[装箱单、皿t单、尺码单1装箱单(Pack-ing Ust)是说明货物包装情况的单据，包括包装材料、包装方式，以及详细的包装内容，如花色、规格搭配等。进口地海关主要依据装箱单对某一特定内容的包装内容进行检查，也是进口商核对货物的依据。装箱单的内容有:单据名称、卖方名称、唆头、件数、规格、数量、毛净重、签字等。 重量单(Weight ust)是由卖方或第三者提供的，表明货物重量的单据。一般包括皮、毛、净重。它必须和其他单据上所表示的货物重量一致。 尺码单就不详细介绍了。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条