1) FRP laminates
FRP层合板
1.
Penetration and perforation of FRP laminates under normal impact by ogival-nosed projectiles;
卵形弹丸撞击下FRP层合板的侵彻和穿透
2.
The penetration and perforation of FRP laminates struck transversely by cone-nosed projectiles has been theoretically investigated.
研究了锥头弹丸撞击下FRP层合板的侵彻和穿透性能,在局部化破坏模式假定的基础上改进了Wen提出的能量简化分析模型。
2) FRP/Metal hybrid laminates
FRP/混杂层合板
3) FRP laminate structure
FRP层合结构
1.
The analytic results indicate that the fiber characteristic value,the FRP laminate structure and the loading method are the three major factors that influence the compressive stress-strain relationships of concrete of the FCCs.
分析表明,纤维特征值、FRP层合结构和加载方式是影响FRP约束圆柱混凝土受压应力-应变关系的3个主要因素。
4) smart FRP-FBG composite laminate
FRP-FBG智能复合板
1.
By combining the strength of fiber reinforced polymer(FRP) with the sensing characteristics of fiber Bragg grating(FBG),the new smart FRP-FBG composite laminates were developed.
结合纤维增强聚合物(FRP)材料的强度特性和光纤布拉格光栅(FBG)的感知特性,研制开发了FRP-FBG智能复合板。
5) FRP plate
FRP板
1.
The bond behavior between FRP plate and concrete is studied by experiment on a single shear test setup.
采用FRP板-混凝土块搭接接头的单剪试验方法研究FRP板与混凝土的粘结性能,为增强粘结效果,对FRP板表面采取了粘结粗砂的措施,试验同时考虑粘砂长度对粘结性能的影响。
2.
Based on the theory of elasticity, a four_ point bending RC beam strengthened by a FRP plate is investigated.
基于弹性力学理论,研究了4点弯曲情况下FRP板加固钢筋混凝土梁的界面应力分布。
6) FRP plates
FRP板
1.
Several experimental methods of RC Beam strengthened with prestressed FRP plates;
粘贴预应力FRP板加固砼梁预应力方法的研究
2.
Based on equilibrium equations and stress strain relationships, an effective theory and computational method for the analysis of RC beams strengthened with FRP plates are presented.
该文基于钢筋混凝土结构设计理论中的截面平衡方程和应力应变关系 ,为FRP板加固的钢筋混凝土梁的计算提供了行之有效的理论和方法。
补充资料：N,N-二缩水甘油2,4,6-三溴苯胺玻璃布层合板
分子式：
CAS号：
性质：以三溴苯胺环氧树脂为基料的玻璃布层合板。耐燃性好，相对密度>1.98。机械强度除冲击强度(190kJ/m2)和剪切强度(119MPa)外，其他略次于E-51环氧树脂。将三溴苯胺环氧树脂与有关添加剂配成胶液后，手工糊于玻璃布上，叠层并层合固化即得。可用于要求耐燃的航空、船舶和机电行业。
CAS号：
性质：以三溴苯胺环氧树脂为基料的玻璃布层合板。耐燃性好，相对密度>1.98。机械强度除冲击强度(190kJ/m2)和剪切强度(119MPa)外，其他略次于E-51环氧树脂。将三溴苯胺环氧树脂与有关添加剂配成胶液后，手工糊于玻璃布上，叠层并层合固化即得。可用于要求耐燃的航空、船舶和机电行业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条