1) ABS
[英][æbz] [美][æbz]
制动防抱系统
1.
The operating principles of vehicle pneumatic Anti-lock Braking System(ABS) was briefly introduced,the control logics and the control modes used by current Anti-lock Braking System were analysed also.
介绍了汽车气制动防抱系统及主要元件的工作原理,并对目前汽车防抱制动系统所采用的控制逻辑及控制方式进行了分析。
2.
The ABS developmental technology based on computer simulation is presented,three steps of development are presented in detail and experimentation is designed.
该文阐述了基于计算机仿真的制动防抱系统开发技术,详细介绍了基于计算机仿真的制动防抱系统开发的三个步骤,并且给出了各个阶段的试验方案;建立了双轴汽车的制动防抱系统通用仿真开发平台,该平台具有对各种车辆ABS开发的互换性,并且操作简易,灵活;为了模拟ABS在各种路面的制动状况,该平台设计出了路面跃变模块,可进行单一路面和跃变路面的制动防抱系统仿真试验。
3.
The operating principles of vehicle pneumatic Anti-lock Braking System(ABS)was briefly introduced, the control logics and the control modes used by current Anti-lock Braking System were analysed also.
介绍了汽车气制动防抱系统及主要元件的工作原理,并对目前汽车防抱制动系统所采用的控制逻辑及控制方式进行了分析。
2) Anti-lock braking system
制动防抱系统
1.
Simulation study of the vehicle s anti-lock braking system in consideration of braking on crooked roads;
车辆转向时制动防抱系统的仿真研究
3) Anti-lock Brake System
制动防抱系统
1.
In this paper, the working priciple of anti-lock brake systems for passenger cars and their components are introduced.
本文介绍了轿车制动防抱系统的工作原理及系统组成，分析了现有的一些制动防抱系统使用的局限性，提出了提高道路附着利用率，改进制动防抱系统性能的措施。
4) Anti-lock Braking System
防抱制动系统
1.
Simulation of the algorithm for integrated coordination control of the anti-lock braking system and active suspension system of vehicles;
车辆防抱制动系统与主动悬架系统集成协调控制算法的仿真
2.
Design of fuzzy logic controller for anti-lock braking system;
汽车防抱制动系统控制理论研究
3.
Research on the layered integrated control of the vehicle s active suspension and anti-lock braking system;
汽车主动悬架与防抱制动系统分层集成控制研究
5) ABS
[英][æbz] [美][æbz]
防抱死制动系统
1.
Fault Diagnosis of ABS;
防抱死制动系统的故障诊断
2.
Overhaul on ABS of TOYOTA CAMRY Car;
丰田佳美轿车防抱死制动系统的检修
3.
A simulation model of the integrated dynamic control system of active front steering(AFS)and anti-lock braking system(ABS)is set up using carsim and matlab/simulink.
以车辆动力学软件Carsim和Matlab/Simulink为平台,分别建立了基于滑模变结构控制的主动前轮转向(AFS)和滑移率门限控制的防抱死制动系统(ABS)控制器模型,并将2种控制系统进行了集成,建立了联合仿真模型。
6) Anti-lock braking system
防抱死制动系统
1.
Simulation study of vehicle s anti-lock braking system based on Matlab/Simulink;
基于Matlab/Simulink的汽车防抱死制动系统的仿真研究
2.
To provide an economic and efficient test method for vehicle anti-lock braking system(ABS) in laboratory,the idea of designing a dynamic test-bed is researched and developed,which can simulate actual working status of automobiles well and truly.
针对目前防抱死制动系统(ABS)产品试验过程中存在的弊端,对汽车、摩托车ABS性能试验台作了深入研究,为了给汽车ABS提供一种在实验室环境下经济高效合理的测试手段,提出一种能够较为准确地模拟汽车实际工作情况的动态试验台设计思路。
3.
Assuring the control effect and dependability of anti-lock braking system(ABS) under various special working conditions is important for ABS.
为保证汽车防抱死制动系统(ABS)在特殊工况下的控制效果和可靠性,研究了不平路面制动、低速状态制动、转向制动、过沟坎制动4种典型ABS特殊工况,根据特殊工况的识别、控制量计算补偿和控制流程调整的思路,提出通过轮加速度信号识别路面不平度的不平路面补偿控制算法、上升下降沿同时采样的低速补偿控制算法、转向识别补偿算法和沟坎识别防止ABS误动作补偿算法。
补充资料：ABS-防抱死制动系统
近来ABS的发展是采用电子机械的控制，以更快更精密控制刹车油压的收放，来达到防止轮胎锁死，确保轮胎的最大刹车及转向能力，增进车辆紧急刹车状况的危险回避能力。ABS车型其正确的操作方式就是一脚踩到底，不要慌张，冷静的进行危险障碍物的回避，相信必能将出事率降至最低。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条