1) fuelling efficiency
加料效率
1.
The fuelling efficiency and injection depth are the fundamental problems of supersonic molecular beam fuelling.
超声分子束注入深度与加料效率是分子束加料研究中的基本课题。
2) working efficiency
加工效率
1.
NC machine tool's working efficiency affected by sorts of factors in modern manufacturing engineering,the Vibration Stimulated by itself is a key element.
在现代先进制造加工中,影响数控机床加工效率的因素很多,机床工艺系统的自激振动是其中一个关键因素。
2.
How to improve the working efficiency of NC Lathe is the main problem of machine manufacturing.
目前提高数控机床的加工效率已成为机械制造业面临的一大问题。
3.
The working principle and workflow of LOM rapid prototyping manufacture is introduced, the influencing factors of working efficiency of rapid prototyping manufacture are summarized.
对LOM型快速成型的工作原理和处理流程进行了简要介绍,对影响快速成型加工效率的因素进行了总结。
3) processing efficiency
加工效率
1.
Influence of machining parameters on processing efficiency in WEDM;
电火花线切割加工参数对加工效率的影响
2.
On this basis, cueingprocedure was introduced to explore further the deficits of students with learningdifficulties in WM capacity were due to storage ability, processing efficiency or bothof them together.
在严格控制条件下，比较了学困生和学优生在工作记忆（ＷＭ）容量上的差异，并在此基础上引入提示程序进一步探讨，学困生ＷＭ容量低主要是由存贮能力造成的还是由加工效率造成的或是两者同时起作用的问题。
3.
Under same machining conditions(machine,tool,workpiece material,etc),the CNC machining process was optimized and adjusted by the PowerMILL software to improve the processing efficiency.
CNC编程加工过程中,在加工条件相同(机床、刀具、工件材质等)的情况下,通过充分利用PowerMILL编程软件的优化功能和调整加工工艺,消除断刀现象,提高加工效率。
4) machining efficiency
加工效率
1.
Through analysis of these curves,it was demonstrated that only specific speed can lead to the maximum machining efficiency,which would go dow.
分析曲线结果表明,在特定转速范围内加工效率最高,低于或者高于这个转速,加工效率都会下降。
2.
This paper describes an investigation into the optimization of the EDM micro and small hole machining efficiency based on experimental design which considers both servo perameters and electrical parameters.
综合考虑电火花微小孔加工中伺服参数与电参数的影响,采用实验设计的方法对微小孔加工效率进行优化研究。
3.
In manufacturing the drum groove of the drilling winch,there currently exist such problems as low machining efficiency,low accuracy and high cost.
针对目前钻机绞车滚筒绳槽制造存在的加工效率低、加工精度低、制造成本高等问题,对滚筒绳槽的结构特征、制造现状、加工效率、加工精度等方面进行了分析。
5) Twisting Efficiency
加捻效率
6) heating efficiency
加热效率
1.
The heating efficiency for a rotational cylinder shell under CW-laser irradiation is studied.
为了把激光加热静止圆柱壳的实验测量结果应用到旋转圆柱壳的激光参量估计中,研究了旋转圆柱壳的激光加热效率。
2.
By introducing the definition of heating efficiency,an approximate analytical expression is given.
基于傅里叶热传导方程,利用积分变换法推导出连续激光和重复频率(RF)激光束辐照圆柱壳体温度分布的三维近似解析解,给出了重复频率激光相对于连续激光的加热效率表达式。
3.
A new type high-temperature air heater,which is combining medium frequency heating equipment with a static fluid mixer,has been put forward,and test study being carried out to know the fluctuation property of power source,the drag force characters in cold and hot state,and the heating efficiency of the new type air heater.
高温空气加热器是高温空气点火试验台的关键设备,将中频加热设备和静态混合器相结合,提出了一种新型的高温空气加热器,并对其运行过程中的电源波动特性、冷热态的阻力特性、加热效率进行了试验研究。
补充资料：配置效率和生产效率
在经济学上，经济发展的动力，或者说效率的来源，分为两类：一类是配置效率，二是生产效率。所谓配置效率，是指给定资源和技术的条件下，怎么样使资源从边际生产率低的地方流向边际生产率高的地方，从而使得资源和利用更合理、社会总价值达到最大;而生产效率是指如何通过技术进步提高每一种资源的生产率，也就是把社会的生产可行性边界向外移。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条