1) sequence planning
序列规划
1.
Research on assembly sequence planning oriented to virtual assembly;
面向虚拟装配的装配序列规划技术研究
2.
After analyzing the characteristics of the assembly process of connectors,typical knowledge base and standard knowledge base were set up for assembly sequence planning.
该方法利用联接件装配工艺的特点和知识,进行装配序列规划,建立了基于联接件知识的装配实例库,生成装配序列的途径有典型实例的匹配、标准实例的匹配和运用有向联接件知识的装配序列规划。
3.
The problem of sequence planning can be translated into Traveling Salesman Problem (TSP).
序列规划问题一般转化为旅行商问题来求解。
2) sequential quadratic programming
序列二次规划
1.
Based on this technique and the sequential quadratic programming(SQP) method,a new active set filter SQP method is proposed in which the penalty function is not required by filter strategy.
基于此策略,结合序列二次规划(SQP)方法,并利用滤子以避免罚函数的使用,提出了一类积极集SQP滤子方法,并在合理条件下证明了算法的全局收敛性。
2.
Hybrid method combines Pontragin maximum principle with sequential quadratic programming,but the transversality conditions are not considered.
利用混合法,即通过结合Pontryagin极小值原理和序列二次规划方法,舍弃了横截条件,避免了直接求解非线性两点边值问题,从而极大地提高了迭代的收敛性。
3.
Firstly,the damaged areas were approximately localized by the damage index of the measured degree of freedom;secondly,the damaged members were located and quantitatively evaluated by the sequential quadratic programming and least-square method in the selected areas,and the results were compared.
首先利用测量自由度正则化损伤指标向量得到损伤的大致区域;其次,在选定的区域内分别采用序列二次规划算法和最小二乘法来诊断损伤构件及其损伤程度,并对其结果进行了比较。
3) assembly sequence planning
装配序列规划
1.
Assembly modeling for assembly sequence planning;
面向装配序列规划的装配建模方法研究
2.
Hybrid algorithm for assembly sequence planning;
装配序列规划问题求解的一种混合算法
3.
Immune algorithm for assembly sequence planning problem;
基于免疫算法的装配序列规划问题求解
4) SQP
序列二次规划法
1.
IPACA only models the discrete control variables to reduce the calculation time,and use Sequential Quadratic Programming(SQP) to solves the state variables and the continuous control variables.
新算法只考虑离散变量,以降低计算时间,同时使用序列二次规划法求解连续变量。
2.
Based on the fitting results and its inner law,the calculating efficiency in optimizing the reactor is increased via applying the sequential quadratic programming(SQP) method.
基于其内部规律,结合拟合结果,应用序列二次规划法(SQP)对电抗器进行优化,提高了优化计算效率。
5) successive quadratic programming
序列二次规划
1.
Application study of successive quadratic programming in optimal schedule of multi-souses water distribution network;
序列二次规划法在多水源管网优化调度中的应用研究
2.
An algorithm of successive quadratic programming(SQP)type is presented to program problems with nonlinear equality and inequality constraints.
建立非线性等式和不等式约束规划问题的一个序列二次规划(SQP)型算法。
3.
The successive quadratic programming method is effective in solving small-scale nonlinear programming restrain problem.
序列二次规划(SQP)方法求解中小规模非线性约束下的最优化问题很有效,因此,笔者研究了序列二次规划(SQP)方法及其在非线性规划中的应用。
6) sequential quadratic programming(SQP)
序列二次规划法
1.
In this paper,the major members,web members,and their cross-section sizes are optimized in Matlab using sequential quadratic programming(SQP) method.
抱杆设计时,选用抱杆质量为目标函数,以满足设计容许中心压力为约束条件,对抱杆的主材、斜材和断面尺寸进行综合优化,利用序列二次规划法在Matlab软件上进行计算。
2.
For the purpose of discovering the near-globally optimal solution,this paper proposed a hybrid approach of ant colony algorithm and sequential quadratic programming(SQP).
在此求解过程中,以每只人工蚂蚁来表示符合限制条件的某个可运转状态的发电机组合并以序列二次规划法来求解传统的经济调度问题。
3.
The sequential quadratic programming(SQP) method for nonlinear constraint problem is applied for the segmented primary mirror cophasing control.
研究采用一种求解非线性约束问题的序列二次规划法优化求解主镜致动器的位移控制指令,校正分块式主镜相位误差。
补充资料：城市总体规划与国土规划、区域规划的关系
国土规划、区域规划、城市总体规划是在不同层次、涉及不同地域范围的发展规划。国土规划、区域规划、城市总体规划组成一个完整的规划系列，国土规划和区域规划应当是城市总体规划的重要依据。而全国和区域性的江河流域、土地利用等专业规划则是国土和区域规划的重要组成部分，城市土地利用规划又是城市总体规划的重要组成部分。
我国的国土规划、区域规划以及江河流域规划、区域性土地利用总体规划等工作起步较晚，目前正在有计划、有重点地逐步展开，还没有法定的审批程序和审批成果。而全国绝大多数城市总体规划已经各级政府按法定程序审批，并在不断完善和深化，在实际工作中存在着相互联系和交叉的情况，因此本法原则确定应当相互协调的关系是必要的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条