1)  flexible pier
柔性高墩
1.
After the analysis of the support knuckle association,and based on the research on the top knuckle offset calculation of flexible pier,it brings forward more refined support knuckle check and modified formula,and gets the conclusion of easier application to the modified formula,which will have important meaning to assure the no-disengaging in the rubber support using process.
经过对支座转角组合进行的分析,在研究柔性高墩墩顶转角位移计算方法的基础上,提出了更加严密的支座转角验算修正公式,得出修正后的转角验算公式易于应用的结论,对于保证板式橡胶支座在使用过程中不脱空有重要的意义。
2)  flexibility
柔性
1.
Improvement on flexibility of water-reusing system with multi-contaminants through changing network structure;
通过改进网络结构提高多杂质水系统柔性的集成方法
2.
Virtual Part-A New Concept for Increasing Productivity and Flexibility of Flexible Machines;
“虚工件”法——提高柔性制造设备生产率和柔性的一种新方法
3)  flexible
柔性
1.
Studies on flexible unsaturated polyester resin from polyether glycol and its flexible curing system;
聚醚二元醇不饱和聚酯树脂及其柔性固化体系
2.
A flexible reforming of plant for the food additive sodium phosphate production;
食品添加剂磷酸钠盐装置的柔性化改造
3.
GMAW flexible accommodation for closed round bead with torches;
封闭焊缝多焊炬GMAW焊机的柔性化控制
4)  flexibleness
柔性
1.
It points out the importance that the traditional modular machine-tool and its production line have the flexibleness.
论述了柔性生产线的特点及发展趋势,介绍了数控组合机床的基本组成及常见的形式,指出了使传统的组合机床及其自动线具有柔性的重要意义。
2.
In the field of machine control, the conception of flexibleness and openness are very similar.
对数控系统的“柔性”与“开放性”的概念分别作了深入的分析,明确了“柔性”与“开放性”这两个不同概念之间的相互关系。
3.
Theory and methodology of mechanism dynamical reliability analysis considered the influence of friction and flexibleness were presented.
提出了摩擦和柔性影响下的机构动态可靠性分析的理论和方法,给出了柔性机构动态可靠性分析的广义模型。
5)  suppleness
柔性
1.
Suppleness Technology of Workflow Management System;
工作流管理系统的柔性技术
2.
It also introduces construction methods of the steel framed HDPE pipe that has a suppleness characteristic of expansion with heat and contracts with cold,this laying a foundation for the application of steel framed HDPE pipe widely used in Various fields in future.
对钢骨架塑料复合管在东海大桥给水工程中的应用进行了系统研究,介绍了钢骨架塑料复合管在工程使用中的各种施工控制措施,并针对钢骨架塑料复合管自身热胀冷缩、柔性特点在使用过程中的控制措施做了详细介绍,为今后钢骨架塑料复合管在各种领域中更加广泛的应用奠定了基础。
3.
Therefore, granting grace period must be limited on some special occasions, so that we could strengthen rigidity and weaken suppleness of law in execution procedure.
必须将执行宽限严格控制在少数特殊情况之下 ,以张扬强制执行法刚性的一面 ,弱化其柔性的一面。
6)  flexible rolling
柔性辊轧
1.
The research on the process of flexible rolling for shaft forgings and experiment;
轴类件的柔性辊轧成形工艺与实验研究
2.
The flexible rolling process is suitable for forming of the step shaft forgings,with the advantages such as short development period,lower cost and high flexibility.
柔性辊轧成形轴类零件具有周期短、成本低、高柔性的特点,但中心材料容易产生疏松或孔腔等损伤缺陷。
参考词条
补充资料：高分子链柔性
分子式：
CAS号：

性质：高分子链能够改变其构象的性质。可分为静态柔（顺）性和动态柔（顺）性两个方面。静态柔（顺）性，又称平衡态柔（顺）性，是指高分子链处于较稳定状态的蜷曲程度。在一个高分子链中，第一个σ键都可能取反式、左旁式或右旁式三种较稳定的构象状态，三种构象的能量越接近，链的平衡柔（顺）性就越好。动态柔（顺）性又称动力学柔（顺）性，是指高分子链从一种平衡态构象转变成另一平衡态构象的容易程度。构象转变越容易，转变速率越快，则高分子链的动态柔（顺）性和静态柔（顺）性的综合效应。对于具体的高分子链，两者有时一致，有时不一致。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。