1)  coal quality
燃煤质量
1.
The influence of coal quality decline upon flame temperature level in the furnace of coal-firing utility boiler,upon flame temperature level in outlet region of the burners,as well as upon furnce-incoming coal quantity,air quantity,and pulverized coal and air flow at outlet of the burners,and upon combustion stability in the furnace has been analysed.
分析了燃煤质量下降对电站燃煤锅炉炉内火焰温度水平、燃烧器出口区域火焰温度水平及入炉煤量、风量、燃烧器出口煤粉气流速度的影响,进而对煤粉气流着火过程和炉内燃烧稳定性的影响。
2)  coal combustion
燃煤
1.
Experimental research on capture of PM_(10) emitted from coal combustion with high gradient magnetic field;
高梯度磁场中燃煤PM_(10)的捕集试验
2.
Aggregation mechanism of PM10 from coal combustion in uniform magnetic field;
燃煤可吸入颗粒物在磁场中聚并脱除机理
3.
Promotion effect of additives on sulfur capture during coal combustion with carbide slag;
添加剂对燃煤电石渣固硫的促进作用
3)  coal
燃煤
1.
Mercury Distribution in Coal,Soil and Sediment of the Three gorge Reservoir;
三峡库区燃煤、土壤和水库底泥中含汞量分布特征
2.
Investigation of endemic fluorosis in coal-burning pollution areas in Shaanxi Province;
陕西省燃煤型氟中毒病区及改炉灶进展调查
3.
Analysis on Fuel-coal Technology and Economy of Asphalt Mixing Plant;
沥青拌和设备燃煤技术可行性与经济性分析
4)  coal-fired
燃煤
1.
Overview on contribution and relevant evaluating model of mercury enrichment to atmosphere by coal-fired;
燃煤对大气中汞富集的贡献及相关评价模型
2.
Flue Gas Desulphurization Technology and its Application in Middle and Small Coal-Fired Boiler;
烟气脱硫技术及其在中小型燃煤锅炉中的应用
3.
2 MW horizontal coal-fired hot blast furnace are confirmed.
2 MW燃煤卧式热风炉的设计方案、结构和系统布置,通过采用链条炉排、绝热炉膛、管式换热器、螺纹烟管、烟气再循环、碳钢耐热处理等技术措施,确保了热风炉的使用寿命和运行经济性。
5)  coal burning
燃煤
1.
Investigation on indoor air pollution from coal burning in rural area of Shanxi province;
山西省农村地区室内燃煤空气污染状况调查
2.
To introduce the problems existing in PLC heat treatment muffle furnace by coal burning for steel wire.
介绍PLC燃煤钢丝热处理马弗炉存在的问题,通过改进燃烧室炉拱的结构、改进链式炉排材质和出渣方式、调整风管的布置、扩大积灰槽的容积、增加热交换器等措施,减少设备故障率,大幅延长炉子的维修周期,提高燃煤的适应性,达到节能降耗的目的。
3.
As a result, the optimum desulfurization temperature during coal combustion can be made to further approximate the coal burning temperature, thereby enhancing the d.
水处理固体废物用作燃煤脱硫添加剂的机理及实验研究表明 ,水处理固体废物可以有效地催化脱硫反应 ,减缓高温下CaSO4 分解速度 ,使燃煤脱硫过程的最佳脱硫温度更接近煤的燃烧温度 ,提高燃煤脱硫效率及钙利用率 ;其用作燃煤脱硫添加剂进行脱硫 ,实施系统及流程简单 ,既能减少水处理固体废物排放量 ,减轻对水体的污染 ,也能有效地减少燃煤SO2 的排放
6)  burning coal
燃煤
1.
The production and prevention of SO_2 in burning coal;
燃煤二氧化硫的产生和防治
2.
This article analyzed pollution present situation and the reason produced of sulfur oxide compound in our country;introduced the control technology of burning coal contamination,and proposed control countermeasure of burning coal sulfur oxide compound.
论文分析了我国硫氧化物的污染现状、硫氧化物产生的原因;介绍了燃煤污染控制技术;提出了燃煤型硫氧化物的控制对策。
3.
The smoke from burning coal were analyzed by GC-MS after separation of CO_(2) and condensed by cold trap.
用静态去除燃煤产生的CO2气体,经冷阱两步浓缩,气相色谱-质谱对燃煤产生的烟气样品进行了检测,近100种物质被检测出,其中,二氟二氯甲烷与当地大气背景相比呈显著异常。
参考词条
补充资料:蚕茧质量监督检查和国家生丝质量检验


蚕茧质量监督检查和国家生丝质量检验
cocoon quality supervision inspection and national silk quality inspection

  检验局承担并组织有关检验机构对全国已核发生产准产证的缘丝、绢纺企业的生丝、绢丝质量进行抽查检验(两年共四期),以考核生产企业生丝质量水平。中国桑蚕鲜茧评茧计价方法主要有3种:①鲜上光茧干壳量仪器评定(简称仪评)计价;②“组合售茧、嫌丝计价,’(简称“组、缎”)评茧方法;③茧层率评茧计价。国家质量技术监督局于19望)年6月7日下发了《关于加强茧丝质t监督工作的通知》,要求加强桑蚕鲜茧收购期间的质量监督执法检查;重点做好鲜茧收购过程中“四率”(仪器配备率、仪器完好率、仪评率和仪评相符率)的检查工作。各级专业纤维检验机构应充分发挥职能作用,加强蚕茧质量监督管理;加强对茧站仪评计价工作指导;加强对蚕茧收购计t器具的检定工作;充分运用法律手段,在蚕茧收购期间开展执法检查活动,对违法行为坚决予以查处。 在国家生丝质t检验方面,1998年国家经贸委等4部门联合发布了(缀丝绢纺准产证制度实施办法》,规定缎丝、绢纺企业准产的基本条件。经国家茧丝绸协调小组审议,并报国务院领导批准,“国家生丝质量检验”项目列人(国家茧丝绷发展风险基金》第二批发展项目。该项目由中国纤维检验局承担并组织依法设t或依法授权的具有生丝、绢丝检验能力的纤检局(所)、生丝质检站对全国已核发生产准产证的缀丝、绢丝企业的生丝、绢丝质量进行检验。(吕善模),ngconjian zhilia叩Jiondu iianCha he gUOJia she叩51 zh1旧nyan蚕茧质一监督检查和国家生丝质t检验coon甲ality su伴币sion inspection and natsilk卿ality ins衅tion)专业纤维检验机构蚕鲜茧收购期间,对茧站收购鲜茧进行质量监督和检验的全过程。国家生丝质量检验是指由中国CO-nal桑查维
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。