1)  RD valve
米粒阀
1.
Through adopting embedded digital PID,the adaptability to various operating mode,control accuracy,response speed,reliability and good maintainability of the electro-hydraulic servo control system of the second venturi throat-RD valve were improved.
通过对二文喉口米粒阀门采用嵌入式数字PID电液伺服控制,使系统对各种工况的适应性、控制精度、响应速度、可靠性、易维护性都有了较大的改善。
2)  rice kernel
米粒
1.
The variation of rice moisture content is the most important factor that causes the formation of fissures in rice kernels and affects head rice yield.
潮湿米粒快速干燥或干燥籽粒浸水、回潮均会产生严重的裂纹。
3)  nanoparticles
纳米粒
1.
Synthesis and characterization of hydroxyapatite nanoparticles for medicine utilization:HRTEM,FTIR,NMR,XRD study of hydroxyapatite nanoparticles ultrastructure;
医用羟基磷灰石纳米粒的制备和特性:电子显微镜、傅里叶变换红外光谱、核磁共振、X射线对羟基磷灰石纳米粒的观测(英文)
2.
Preparation and Release Characteristics of Berberine Chitosan Nanoparticles in Vitro;
小檗碱壳聚糖纳米粒的制备及其体外释药特性研究
3.
Preparation of ovalbumin nanoparticles with trimethyl chitosan chloride;
三甲基化壳聚糖卵清蛋白纳米粒的制备
4)  nanoparticle
纳米粒子
1.
Layer-by-layer Assembly Nanoparticle Film Based on Non-covalent Force;
基于非共价键作用力的纳米粒子层层组装薄膜
2.
Hydrothermal synthesis and characterization of rare earth compound nanoparticles and nanorods;
稀土化合物纳米粒子和纳米棒的水热合成和表征
3.
Latest researches in preparation of transition metal sulfides nanoparticles;
过渡金属硫化物纳米粒子制备技术研究进展
5)  nano-particle
纳米粒子
1.
Research advances in modification of epoxy resin by nano-particle;
纳米粒子改性环氧树脂的研究进展
2.
Research on Surface Modification of Nano-Particles;
纳米粒子表面改性的研究进展
3.
The Optimization of Ni-P Electroless Composite Plating with Si_3N_4 Nano-particles and the Characterization of the Coating Properties;
Ni-P-Si_3N_4纳米粒子化学复合镀工艺优化及镀层性能表征
6)  nanoparticle
纳米粒
1.
Preparation of enrofloxacin nanoparticles and the researches on its pharmaceutical characteristics;
恩诺沙星纳米粒的制备及其药剂学性质研究
2.
Preparation techniques of ofloxacin nanoparticles and its stability;
氧氟沙星纳米粒制备工艺的优化及稳定性考察
3.
Preparation and characterization of biotinylated chitosan nanoparticles;
生物素化壳聚糖纳米粒的制备及其相关性质
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动
说明:补充资料仅用于学习参考,请勿用于其它任何用途。