说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 声学模态
1)  acoustic mode
声学模态
1.
Since there are some connection between the acoustic mode and the combustion instability,it is necessary to analyze acoustic modal of the aero-engine annular chamber flame tubes.
分别对常温常压下和高温高压下燃烧室火焰筒的声学模态进行了分析,获得了相应的声学固有频率和振型,为发动机燃烧室结构抗疲劳设计提供了参考。
2.
And there are some connections between the acoustic mode and the combustion instability.
本文应用有限元方法,对某型航空发动机环形燃烧室火焰筒的振动模态和声学模态进行了研究,获得了相应的固有频率和振型,并完成了声学测量实验验证。
2)  acoustic modality
声学模态
1.
A measuring method of acoustic modality of a car cavity is put forward to acquire its modal frequencies and modal shapes using LMS Test_lab software after gathering and analyzing test data of a real car.
介绍了轿车车内空腔声学模态,对实车的声模态进行了测试与分析,获得了车内空腔的声学共鸣频率和模态形状;提出了利用LMSTest_lab对轿车车内空腔声学模态进行测试的试验方法,为车内空腔的低频噪声研究提供了参考。
2.
This topic introduces the acoustic modality of car cavity,presents a kind of testing method to acquire the modal frequency and compares the test result with the result of Finite Element Analysis (FEA).
阐述了轿车车内空腔声学模态 ,为了获取车内空腔的声学共鸣频率 ,提出了一种空腔声学模态试验方法 。
3.
The acoustic modality of the enclosed cylindrical volute casing with asound-soft boundary and the mathematical modals at a higher order acoustic modal frequencyfor the volute casing of a centrifugal fan with a practical.
根据离心风机蜗壳的结构特点,将其简化为一圆柱体,并00在分析声刚性蜗壳的声学模态的基础上,研究了蜗壳声软边界壁面引起蜗壳声学特性的变化,并由此得到了封闭声软边界圆柱体田壳的声学模态和具有开孔的实际声软边界离心风机蜗壳高阶声学模态频率的数学模型。
3)  acoustic mode
声模态
1.
Acoustic modes of the combustion chamber were calculated with FEM software ANSYS when the length and number of baffles change,and the influences of the changes on the acoustic modes are compared.
利用ANSYS软件数值计算了隔板长度变化以及隔板数目变化时,对应的燃烧室声模态,并比较了它们的变化对燃烧室声模态造成的影响。
2.
Analysis is done to compare the results of acoustic model analysis with the excitation frequency characteristics of both inside and outside of the car,which provides the evidence for the cab noise prediction and the acoustic characteristic i.
采用Hypermesh软件建立了某车型的室内声场有限元模型,用SYSNOISE软件对该有限元模型进行自由模态分析,得到声场的各阶模态频率和振型,将声模态分析结果与汽车内外部的激励源频率特性进行对比,为改善车内声学特性,对车内噪声预测提供了参考。
4)  noisy modt
噪声模态
5)  acoustic model
声学模型
1.
Acoustic Modeling for Continuous Speech Recognition;
连续语音识别中声学模型的建立
2.
Researching of the Mongolian Acoustic Model Based on Speech Recognition;
面向语音识别的蒙古语声学模型的研究
3.
A microstructure based acoustic model is introduced,which can be used to optimize the microstructure of cellular materials and thus to obtain their optimal acoustic property.
介绍了一种基于微结构的声学模型,可用来对多孔材料的微组织结构进行优化,从而使多孔材料具备最佳的声学性能。
6)  acoustic modeling
声学建模
1.
Small data set-based acoustic modeling for dialectal Chinese speech recognition;
基于小数据量的方言普通话语音识别声学建模
2.
In this paper, the techniques of acoustic modeling and parameter tying strategy are thoroughly studied.
声学建模是语音识别领域中的关键问题之一。
3.
This paper first introduces the background and history of the research on current broadcast news transcription systems; then describes the key technology of mandarin broadcast news transcription systems in details, such as acoustic modeling and adaptation technology.
本文首先介绍了目前国际上广播电视新闻自动记录的发展历史和研究现状,然后详细阐述了汉语广播电视新闻自动记录系统的声学建模与自适应技术等关键技术问题,最后,对于我国开发自己的汉语语音识别系统提出了具体解决方案。
补充资料:声学模(见晶格动力学)


声学模(见晶格动力学)
aeoustieal mode

声学模aeoustieal mode见晶格动力学:
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条