1) overlapped tunnel
叠交隧道
1.
The overlapped tunnels amount to 437.
浦东南路站~南浦大桥站区间隧道工程全长2000米,在浦西段位于南浦大桥桩基间施工,为确保线型同时避让南浦大桥桥桩,采用长距离叠交隧道施工工艺,叠交距离达437。
2) overlapping tunnel
交叠隧道
1.
The ground surface displacement and the interactions of the overlapping tunnels,which are settled in Taidong of Qingdao city and excavated separately by glasses method and tri - step method,were studied by the use of 3 - dimensional numerical simulation.
对青岛市台东站近距离交叠隧道分别采用眼镜法和三台阶法施工时引起的地表沉降和上下隧道交互影响进行了三维数值仿真模拟研究。
3) overlap station and tunnel
交叠车站与隧道
4) overlap tunnel
重叠隧道
1.
Analysis of deformation regularity of stratum above overlap tunnel;
重叠隧道上覆地层变形规律分析
2.
Construction technology of overlap tunnel in Laoda zone of Shenzhen metro;
深圳地铁老大区间(西段)重叠隧道施工技术
5) Overlapped tunnel
重叠隧道
1.
In the paper,the pattern of the surface subsidence caused by tunnel construction,such as the scope of the surface subsidence caused by overlapped tunnel construction,the magnitude of t.
深圳地铁一期工程国贸站—老街站区间暗挖隧道设计为单洞双层重叠隧道,国内地铁工程首次采用该种特殊结构形式,隧道采用台阶法分四步开挖。
2.
To investigate the evolving regularity of structural internal force governed by tunneling of overlapped tunnels,3-D elastic-plastic numerical simulations were conducted on two overlapped tunnels in Laojie-Dajuyuan section of the Shenzhen metro.
为了探讨重叠隧道近接施工引起的结构内力演变规律,以深圳地铁老街—大剧院区间重叠隧道为背景,进行了三维弹塑性有限元分析。
3.
It is the first time in China that the construction of the overlapped tunnels is executed after the pile foundations of a large building with large axial forces are underpinned and cut.
对高大建筑进行大轴力桩基托换后再截桩进行重叠隧道施工在国内尚属首例,施工中不仅要保证桩基托换过程中建筑物的安全与稳定,还要控制下方隧道穿越过程中托换桩与结构柱的沉降,确保结构稳定。
6) overlapping tunnel
重叠隧道
1.
Taking the overlapping tunnel of Shenzhen Metro Phase I project for example,the FLAC~3D (fast Lagrangian analysis of continua)codes was adopted to model the stratum 3D deformation regularity caused by four-step shallow tunnel construction method(STCM).
以在建的深圳地铁I期工程重叠隧道为例,采用FLAC3D非线性大变形程序对重叠隧道暗挖四步台阶法施工引起的地层三维变形规律进行了数值模拟研究。
补充资料：交叠针
交叠针 服饰刺绣针法之一，又称“绞形针”、“叉针”。常用于叶片的刺绣。针迹可疏可密，以紧密的针迹较为美观。一般有五种变化：一、针迹较疏；二、针迹较密，绣成二端尖、中间宽的叶片状；三、交叠针正面为上下交叠的叉形针迹，而反面形成为一个针迹连接的轮廓；四、绣成中间像人字形交叠，更具有叶脉状效果；五、运用交叠、勾针，形成一种弧状形交叠针，较活泼生动。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条