1) compaction
[英][kəm'pækʃən] [美][kəm'pækʃən]
压密
1.
On the basis of the theory,the paper analyzes the effects,such as permeability,compaction and splitting,of post-grouting to pile shaft and soil around pile tip qualitatively,and the paper also analyzes the change of front-to-back bearing capacity and its influencing factors.
本文应用柱形塑性扩张理论对灌注桩后压浆的最终扩张压力与扩散半径进行推导和计算,定性分析了后压浆对桩侧,桩端土产生渗透、压密、劈裂三种效应机理,应用经验公式分析了压浆前后承载力的变化及其影响因素,通过工程实例总结得出相关结论,对于同类工艺的技术参数选取有现实的指导意义。
3) green density
压坯密度
1.
Warm compaction behavior of 316L stainless steel was investigated, influences of processing parameters of warm compaction on green density of 316L stainless steel were studied.
研究316L不锈钢的温压行为,分析温压工艺参数对压坯密度的影响。
2.
It is found that the green density and sintered density of YBa_2Cu_3O_(7-δ) powders with different granularity varied differently with the variation of pressure.
结果表明,不同粒度YBaCuO超导粉体的压坯密度、烧结密度(即烧结前后的致密度)随压力的变化规律不同。
3.
Influences of processing parameters of warm compaction on green density of 420 stainless steel were studied.
对420不锈钢粉末进行温压,探索温压工艺参数对压坯密度的影响,并对温压与室温模压(添加0。
4) compact zinc slag
压密锌渣
1.
The industrial test on continuous smeltin of compact zinc slag using fuming furnace without heat source is described,the feasibility and economy of all cold charging for continuous smelting of compact zinc slag are discussed.
文章主要描述了烟化炉在没有热源的情况下压密锌渣连续吹炼的工业试验情况,探讨了压密锌渣烟化炉全冷料连续吹炼的可行性和经济性,为烟化炉处理湿法锌渣开辟了新的途径。
5) compact density
压坯密度
1.
The effect of compact density on combustion synthesis of Fe-V-C mixture powders based in electric field was studied using Gleeble thermal simulation equipment.
采用Gleeble热模拟机,在电场和大热流密度作用下,研究压坯密度对Fe-V-C三元系粉末压坯燃烧合成的影响。
2.
Using Gleeble-1500D thermal simulation equipment, the effect of compact density on the low temperature combustion synthesis process of the compact of 55wt%(Ti+C)-45wt%Fe mixture powders was studied.
采用Gleeble-1500D 热模拟机,在电场和大热流密度作用下,研究压坯密度对55%(Ti+C)-45%Fe(质量分数)粉末压坯低温燃烧合成过程的影响。
3.
The paper analyzed the effect of sintering temperature,ball milling method and compact density on the density of MoSi2 disperslion-strengthened copper alloy.
分析了烧结温度、球磨方式和压坯密度对MoSi2弥散强化铜合金烧结密度的影响。
6) compaction granulation
压密法
1.
Revamping the production line of compound fertilizer by compaction granulation process;
压密法复混肥生产线的技术改造
补充资料：压密
分子式：
CAS号：
性质：粉体层或凝集体受外压时体积减小的现象。当粉体层内充满液体时外力和层的变形是成比例的；描述这一现象的数学关系式，叫压密方程，它是土质力学的基本方程。空隙被水充满的粉体层，若进行压密时会引起脱水，因而压密理论作为压缩脱水的理论基础是很有用的。
CAS号：
性质：粉体层或凝集体受外压时体积减小的现象。当粉体层内充满液体时外力和层的变形是成比例的；描述这一现象的数学关系式，叫压密方程，它是土质力学的基本方程。空隙被水充满的粉体层，若进行压密时会引起脱水，因而压密理论作为压缩脱水的理论基础是很有用的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条