说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
您的位置：首页 -> 词典 -> 结渣性能
1)  slagging behavior
结渣性能
1.
Through test of mixedly burning shenhua coal with other bituminous coals in laboratory condition,the regularity of variation in ignition,burnout,as well as slagging behavior and contamination after mixedly burning shenhua coal with other bituminous coals in different ratios has been grasped.
通过在试验室条件下对神华煤与其它烟煤混煤的掺烧试验,掌握了神华煤掺入不同比例其它煤后,混煤的着火、燃尽和结渣性能及沾污性能的变化规律。
更多例句>>
2)  slagging characteristic
结渣特性
1.
Experimental study on the slagging characteristics of biomass briquette combustion equipment;
生物质成型燃料燃烧设备结渣特性试验研究
2.
The studies are carried out on the slagging characteristic of power coal through the index discriminance by measuring the slagging characteristic,the component of coal ash,the melting point of ash and the mechanism of slagging is analyzed according to the testing samples of Jiaozuo anthracite,Shanxi Hejin lean coal,Shanxi Hongdong 1/3 coking coal,Jiyuan coking coal,Shanxi Yulin long flame coal.
通过对焦作无烟煤、山西河津瘦煤、山西洪洞1/3焦煤、济源焦煤、陕西榆林长焰煤五种煤样的结渣特性、煤灰成分、煤灰灰熔点的测定,运用指数判别法研究了煤的结渣特性。
3.
According to test and investigation,we found the slagging characteristics of biomass briquette hot-blast stove,and analyzed as well as concluded the slagging process and its influential factors of biomass briquette hot-blast stove,further,the author concluded slagging genesis of biomass .
采用生物质成型燃料热风炉,分别进行了炉膛温度、燃料层厚度、燃料粒径和过量空气系数等对结渣率影响的试验,根据试验与观察,得出了生物质成型燃料热风炉的结渣特性,并分析总结了生物质成型燃料热风炉的结渣成因、过程及结渣影响因素。
更多例句>>
3)  slagging characteristics
结渣特性
1.
This paper is to introduce the study on slagging characteristics of large capacity coal fired boiler by use of Fuzzy mathematics model.
介绍采用模糊数学方法对我国大容量机组锅炉结渣特性的研究成果。
2.
According to GB/T 1572-2001(the measuring method of fuel slagging characteristics),GB/T 476-2001(ash and slag analytical method)and relevant judging rules,the slagging characteristics of sawdust briquette were analyzed.
根据GB/T1572-2001燃料结渣特性测定方法和GB/T476-2001燃料灰渣分析方法及有关不同判别法则,对木屑成型燃料燃烧的结渣特性进行了分析,认为木屑成型燃料具有轻微结渣与沾污倾向,可作为多种炉用燃料,以实现燃烧设备的安全、稳定、经济燃烧,从而为生物质成型燃料燃烧设备设计提供了理论依据。
3.
The numerical simulations of the slagging characteristics under multi-operating modes in three types of W-flame boiler were carried out by use of the slagging models coupled with the gas-solid two phase flow and combustion models.
采用结渣模型耦合气固两相流动燃烧模型,对3种不同型号W火焰锅炉的结渣特性进行了多工况数值模拟,结合实际运行状况,对结渣位置、程度及原因进行了对比分析。
更多例句>>
4)  slagging property
结渣特性
1.
Results show that with increasing calcium to sulphur ratio a peak valve in slagging property can be observed at the ratio of 2:with a ratio of slagging of calcium based desul.
该文针对六盘水无烟煤中添加石灰石的钙基脱硫试样的结渣特性、加热过程中矿物质行为,利用电子探针对加热过程中不同钙硫比的钙基脱硫灰样的矿物质行为进行研究。
2.
Basing on the maximum subjection degree principle in fuzzy mathematics,a "six factors model" considering the boiler operating condition and common coal slagging property is used to test the veracity of four models on predicting the slagging properties of boiler.
基于最大隶属度原则,采用常规煤质结渣特性指标以及炉膛运行参数组成的“6指标法”对模糊理论预测燃煤结渣的4种常用模型进行了分析和检验。
3.
Basing on the maximum subjection degree principle in fuzzy mathematics, a "six factors model" considering the boiler operating condition and common coal slagging property is used to test the veracity of four models on predicting the slagging properties of boiler.
基于最大隶属度原则,采用常规煤质结渣特性指标以及炉膛运行参数组成的"6指标法"对模糊理论预测燃煤结渣的四种常用模型进行了分析和检验。
更多例句>>
5)  clinkering property
结渣性
1.
A method which is similar to standard method determining clinkering property of coal expect using pressurized combustion reactor is demonstrated.
本文介绍了加压下评定煤结渣性的方法,此法和常压的规范化方法相似,只是把燃烧过程改在加压反应器内进行。
6)  the slagging characteristics
结渣特性
1.
According to the measuring method of fuel slagging characteristics,ash and slag analytical method and relevant judging rules,the author analyzed the slagging characteristics of corn straw briquette through experiments.
根据燃料结渣特性测定方法和燃料灰渣分析方法及有关判别法则,对玉米秸秆成型燃料燃烧的结渣特性进行了试验与分析。
2.
According to the measuring method of fuel slagging characteristics, ash and slag analytical method and relevant judging rules, the slagging characteristics of corn straw briquette was judged.
根据燃料结渣特性测定方法和燃料灰渣分析方法及有关判别法则,作者对玉米秸秆成型燃料燃烧的结渣性能进行了判别。
更多例句>>
补充资料：不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比，碳钢的密度略高于铁素体和马氏体型不锈钢，而略低于奥氏体型不锈钢；电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增；线膨胀系数大小的排序也类似，奥氏体型不锈钢最高而碳钢最小；碳钢、铁素体型和马氏体型不锈钢有磁性，奥氏体型不锈钢无磁性，但其冷加工硬化生成成氏体相变时将会产生磁性，可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比，具有下列特点：

1）高的电阴率，约为碳钢的5倍。

2）大的线膨胀系数，比碳钢大40％，并随着温度的升高，线膨胀系数的数值也相应地提高。

3）低的热导率，约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板，奥氏体型的钢板的综合性能最好，既有足够的强度，又有极好的塑性同时硬度也不高，这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似，其抗拉强度、屈服强度和硬度，随着温度的降低而提高；塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是：随着温度的降低，其冲击韧度减少缓慢，并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下，既有抗氧化或耐气体介质腐蚀的性能即热稳定性，同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准（国家技术监督局）

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条