1) characteristic of joint movement
接缝变形特征
2) expansion joint
变形接缝
3) deformation characteristic
变形特征
1.
Some near-reservoir-area landslide deformation characteristic and stability evaluation;
某近库区滑坡变形特征及稳定性评价
2.
Study on the deformation characteristics of soil layers in regional land subsidence model of Shanghai;
上海区域地面沉降模型中土层变形特征研究
3.
Numerical analysis for shear strength and deformation characteristic of joint plane with complicated surface
复杂节理面剪切强度和变形特征的数值分析
4) deformation features
变形特征
1.
Creep behaviors and deformation features of a single crystal nickel-base superalloy;
一种单晶合金的高温蠕变行为及其变形特征
2.
Deformation features of phyllites and construction techniques on the ridge section of Wushaoling tunnel;
乌鞘岭隧道岭脊段千枚岩变形特征及施工方法
3.
A study of deformation features of gapa landslide using FLAC-3D;
用FLAC-3D分析呷爬滑坡的变形特征
5) deformation behavior
变形特征
1.
Study on the deformation behavior of subgrade embankments on inclined weak foundation;
倾斜软弱地基上路堤的变形特征研究
2.
Based on the experimental results from a mine and the mechanical parameter measurement of the cemented filling body, the stress distribution and deformation behavior of the cemented filling body are investigated by use of the numerical simulation.
结合某矿山应用胶结充填采矿法的试验 ,测试胶结充填体的力学参数 ,采用数值模拟方法研究胶结充填体的受力情况和变形特征。
3.
The result shows that the silt hollow RC shear wall presents ductile bending-shear failure model,its ductility and deformation behavior are advanced because of its failure model.
通过四榀剪跨比相同的空心钢筋混凝土剪力墙墙片在低周反复水平荷载下的试验,对比分析了这些墙片的承载能力、破坏机理、变形特征、截面钢筋的应变情况及耗能能力。
6) deformation feature
变形特征
1.
The parameter design on deep fill treatment by dynamic consolidation method(DCM) has been discussed upon the deformation features of the Soil, and the method for the determination of tamping number is also provided; in addition, a practical engineering on deep fill treatment by DCM is introduced in this paper.
依据新填土变形特征 ,讨论了深厚填土地基强夯处理的参数设计问题 ,提出了关于如何掌握收锤标准等参数简单易行的工程方法 ,并给出了相关的工程实例。
2.
According to the deformation features, model of causative structures are also different for different active faults, then researches related are important for studying the causative condition of great earthquake, determining potential focal reg.
从活动断裂的变形特征来看,不同性质的活动断裂具有不同的发震构造模型,研究这些问题对认识强震的发震条件,划分潜在的震源区或地震危险区,评估发震构造和发震地点具有重要的意义。
3.
The deformation feature of the alloy during creep is that the slipping of the dislocations are activated on the γ\'matrix channels and the dislocations shear in the rafted γ\' phase.
在1040℃、137MPa条件下,合金在稳态蠕变期间具有较高的应变速率和较短的蠕变寿命,而蠕变期间的变形特征是位错在γ基体通道中滑移和剪切筏状γ′相;其中,γ′相形成筏状结构后,沿与应力轴成45°角的基体通道承受最大剪切应力,使蠕变位错易于在基体通道中滑移,是使合金具有较大应变速率的主要原因。
补充资料：变形接缝
分子式：
CAS号：
性质：又称变形接缝。在房屋、桥梁、隧道、水库等建筑工程及其管道中因温度变化等原因造成变形的接缝。通常采用室温硫化硅橡胶胶黏剂、聚氨酯弹性体胶黏剂、液体聚硫橡胶胶黏剂等自身具有良好弹性的胶黏剂进行胶接密封。
CAS号：
性质：又称变形接缝。在房屋、桥梁、隧道、水库等建筑工程及其管道中因温度变化等原因造成变形的接缝。通常采用室温硫化硅橡胶胶黏剂、聚氨酯弹性体胶黏剂、液体聚硫橡胶胶黏剂等自身具有良好弹性的胶黏剂进行胶接密封。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条