1) cooling scheme
冷却方案
1.
Analysis of cooling schemes of linear motor in evacuated tube;
真空管道中直线电机冷却方案研究
2) cooling way
冷却方式
1.
Effects of Cooling Ways on Microstructure of Zn-Cu Peritectic Alloy;
冷却方式对Zn-Cu包晶合金微观组织的影响
2.
Realizations on cooling ways of blast furnace;
关于炼铁高炉冷却方式的几点体会
3.
Any lining structure of blast furnace includes the refractory of inner lining for a blast furnace body building patten and cooling way of the lining A teasonable lining structure is a foudation of long life of any blast furnace Some characteristic on new No1 3 200 m3 blast fuurnace of the Anshan Iron and Steel Group is introduced in this papers
高炉炉衬结构包括本体内衬耐火材料、砌筑方式、炉衬冷却方式。
3) cooling method
冷却方式
1.
Major Cooling Methods and Features of Large Generator;
大型发电机主要冷却方式及特点
2.
Study on lubricants and cooling method for warm extrusion
温挤压加工中润滑剂与冷却方式研究
3.
The effects of different heating temperature and cooling methods on the microstructure and properties of BT-20 alloy were studied.
研究了不同的加热温度及冷却方式对BT-20合金组织和性能的影响,获得该合金在三种热处理制度下的显微组织图以及所对应的室温力学性能。
4) Cooling Method
冷却方法
1.
Further more the recent research work and some improvement in seeking new cooling methods for machining processes are shown.
在概述了金属切削液及其发展的基础上 ,指出了目前冷却方法即使用切削液过程中存在的主要问题 ;列举了当前国内外在探索新的冷却方法方面的进展 ,提出在世界性环境意识提高的大背景下 ,少、无切削液加工技术将是制造业未来发展的一个重要趋
2.
To test its feasibility,the corresponding bioheat transfer process applying this cooling method during LITT was studied through extensive numerical simulations.
结果表明,深低温流体冷却方法可避免局部高温对组织的炭化,并显著扩展有效加热范围,从而对肿瘤实施高效的热凝固。
5) cooling mode
冷却方式
1.
Reformation of main transformer cooling mode and effect analysis
主变压器冷却方式改造及其效果分析
2.
The results show that the primary factors influencing the mechanical performance of the cement is the cooling mode;burning temperature is the second;the keeping time is the least.
结果表明:对该熟料力学性能影响最大的因素是冷却方式,其次是烧成温度,影响程度最小的是保温时间。
3.
It is considered that the furnace-cooling mode is more close to the practical cooling mode of castings in molds.
通过实验对比了炉冷和空冷两种冷却方式对水玻璃砂经高温加热后的残留强度值测定的影响,认为炉冷的方式更接近于铸型实际的冷却情况,得到的结果能更好的评价溃散剂真实的溃散效果。
6) Cooling pattern
冷却方式
1.
The effects of quenching temperature, cooling pattern, tempering temperature and tempering time on the microstructures and mechanical properties of high speed steel (HSS) roll have been investigated.
研究了淬火温度、冷却方式、回火温度和回火次数对高速钢轧辊组织和性能的影响。
2.
These measures includes establishing the units for accidental chlorine gas treatment, improving the chlorine gas cooling pattern, reforming the foam drying orifice column, changing the chlorine gas pump, improving the chlorine gas self- control measures, and etc.
通过增加事故氯气处理装置、改进氯气冷却方式、改装泡沫干燥筛板塔、更换氯气泵及完善氯气自控手段等措施,完善了氯气处理工艺,达到了节电、提高氯气质量及延长设备使用寿命的目的。
3.
The influences of quenching temperature, cooling pattern and temper temperature on the structures and properties of high chromium cast iron roll were investigated.
研究了淬火温度、淬火冷却方式和回火温度对高铬铸铁轧辊组织和性能的影响。
补充资料：《眉寿堂方案选存》
《眉寿堂方案选存》 《眉寿堂方案选存》 医案著作。二卷。清·叶桂撰，郭维浚编。原系抄本，后收入《中国医学大成》中。上卷包括春温、时疠、暑、燥、寒、冬温、疟疾等各类时症；下卷记述妇、儿、痘疹、外科。每类病证之医案均重点介绍辨证立法及处方，辨析疑似之证，掌握各类疾病治法。其中妇科治案记述尤详。现存《中国医学大成》本。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条