1) loss/parasitic parameters
损耗/寄生参数
2) parasitic parameter
寄生参数
1.
Design and realization of accurate parasitic parameter extraction tool;
精确寄生参数提取软件设计和实现
2.
Based on design requirements of analog channel of DAQ system,according to actual problems to be solved in high-speed analog channel,such as parasitic parameter of circuit element,source noise and high frequent crosstalk on PCB,research has been carried out.
基于数据采集系统模拟通道的设计要求,针对高速模拟通道中元件的寄生参数、电源噪声和PCB板上的高频串扰等实际问题进行研究。
3.
For the geometric sizes,asymmetrical electrical parameters and magnetic circuit parameters and parasitic parameters,analyze the reason of zero voltage and how to eliminate residccal voltage.
针对自感式传感器几何尺寸,电气参数和磁路参数的不对称、存在寄生参数,零点电压产生原因以及在生产制造上如何消除零残进行了分析。
3) parasitic parameters
寄生参数
1.
Changing the thickness of the insulator layer between the primary and the secondary can obtain different values of parasitic parameters and a new method to avoid parasitic oscillations with dangerous high voltage spikes to improve the .
将电磁仿真软件Maxwell 3D和电路仿真软件Saber通过优化软件iSIGHT进行集成,研究了平面变压器的寄生效应,通过改变平面变压器原边与副边绕组之间的绝缘层厚度,调节绕组各寄生参数的大小,实现了降低危及开关安全运行的电压尖峰,改善开关电源的性能,最终获得平面变压器的最优设计,并通过仿真分析来验证理论分析的正确性。
2.
It is proved that the inverter-input-side parasitic parameters of the DC cable have trivial effects on CM EMI and the parasitic capacitors between the inverter and the ground have significant effects on CM EMI as well as the parasitic capacitors between motor windings and motor shell.
研究表明逆变器输入侧的直流电缆的高频寄生参数对传导干扰的影响很小,而逆变器散热片对地的寄生电容、交流电缆对地的寄生电容、电机绕组对机壳的寄生电容对共模传导干扰的影响很大,在高频段更为明显。
3.
The effects of parasitic parameters on the CM noise spectrum are also analyzed.
文章中结合实验结果对电路中的寄生参数对共模电流频谱的影响进行了分析。
4) parasite parameter
寄生参数法
1.
The thermokinetic oscillation in a homogenous nonisothermal singbe component schlgl model system under a certain boundary condition is analyzed, by use of small parasite parameter and linearized stability analysis, both analytically and with computer.
分别借助小寄生参数法与线性化稳定性分析法,具体讨论了产生温度 浓度振荡的阈值,并计算了参数空间中的振荡区,论证了两种分析方法出现振荡的参数空间重叠区,是该类二变量体系出现吻合一致的极限环振荡的充分必要条件。
5) return wave loss parameter
回波损耗参数
6) parasitic parameter extraction
寄生参数提取
1.
Efficient preconditioning methods for 3-D parasitic parameter extraction using the boundary element method;
三维边界元寄生参数提取中的有效预条件方法
2.
RLC parasitic parameter extraction and reduced-order modeling of high-frequency transmission lines;
高频互连线RLC寄生参数提取和低阶建模
补充资料：介质损耗角正切试验(见电容率与损耗因数试验)
介质损耗角正切试验(见电容率与损耗因数试验)
dielectric loss tangent test
)!eZh.sunhooJ一002匕engq一e sh一yon介质损耗角正切试验(dieleetri。1055 tangenttest)见电容率与损耗因数试验。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条