1) flushing parameter
洗井参数
2) cleaning parameter
冲洗参数
1.
Obtaines optimal cleaning parameters like length,diameter of flush water outfall,air pressure,hydraulic pressure of different diameter pipelines.
获得了针对不同口径干线的最佳冲洗长度、排污口直径、最佳脉冲气压和水压等冲洗参数。
3) cleaning parameters
清洗参数
1.
The cleaning parameters affecting cleaning rate using pure water jets to clean road surface were researched.
研究了使用纯水射流进行路面清洗时,影响路面清洗率的清洗参数。
4) logging parameters
测井参数
1.
Inversion of multi-logging parameters under constrain of relative wave impedance data volume and application.;
相对波阻抗数据体约束下的多井测井参数反演方法及应用
2.
In the past, the prediction of the reservoir production capacity by logging parameters was based on a single testing well.
过去人们利用测井参数对储层产能的预测都是基于单层测试资料。
3.
The causes producing logging parameters and containing water of the low resistance reservoir are analyzed.
对孤东油田七区西馆陶组下段低电阻率油层特征进行了研究 ,分析了造成低电阻率油层的因素、测井参数特征及含水率的影响 ,探讨了该区低阻油层分布规律和开发过程中需要注意的问题。
5) drilling parameters
钻井参数
1.
, drilling parameters reasonably matched well, polymer clay free drilling fluid injected-time prolonged, drilling bit types .
通过合理匹配钻井参数、延长聚合物无固相钻井液的使用时间、优选钻头类型、提高钻井液抑制性、改善钻具结构等技术措施,极大地提高了该地区的钻井速度,平均机械钻速提高到现在的12m/h以上,缩短了钻井周期,达到了预期的效果。
2.
Based on principle of modularized design,the article discusses how to divide modules of drilling parameters instrument,rules of design and the main work of design.
文章以模块化设计原理为基础,讨论了钻井参数仪的模块划分,模块化设计准则和主要设计内容。
3.
Starting from the view point of practical application, based on large amount of pressure well logging data home and abroad, the author demonstrated how to distinguish over-pressure formations using wellsite data, through selected methods such as drilling parameters, rock fragment analysis, drilling fluid parameters, and electric well-logging.
本文从现场实用性的角度出发,综合国内外大量压力录井资料,其中,选取了部分常用的压力评价方法,如钻井参数、岩屑分析、钻井液参数、电测井等,对如何利用现场资料来判断超压层进行阐述。
6) parameter well
参数井
1.
The application instance of wireline coring technique was introduced with the project case of coal-bed methane parameter well in Baotian-Qingshan area of Guizhou,the drilling techniques were brought forward in accordance with complex formation,unstable borehole wall,being hard to core in coal powder.
以贵州保田-青山煤层气参数井工程为实例,介绍了绳索取心工艺在该区的应用情况,并针对地层复杂、孔壁不稳定、粉煤取心困难等工程难点,提出相应的工艺技术。
2.
Aimed at general situation of CBM in Qinshui Basin,strata condition and exploitation condition,introduced parameter well,producing well,multi-bran chsurface CBM horizontal development well and cluster wells drilling technology,drilling tool assemblage,well structure and well quality requirements.
针对沁水盆地煤层气概况,地层情况及开采条件,介绍了参数井、生产井、多分支地面煤层气水平开发井、丛式井等钻井工艺、钻具组合、井身结构及井身质量要求。
3.
Coal bed gas parameter well SPMT-1 is located at the Shiping well field, Guxu mining area, South Sichuan Coal Field.
SPMT - 1号煤层气参数井位于川南煤田古叙矿区石屏井田。
补充资料：洗井液
分子式：
CAS号：
性质：又称冲砂液，冲洗液。用来冲洗井壁，清除井内沉渣或淤砂的流体。一般由表面活性剂及溶剂组成，并添加增黏剂和降滤失剂以调整其性能。
CAS号：
性质：又称冲砂液，冲洗液。用来冲洗井壁，清除井内沉渣或淤砂的流体。一般由表面活性剂及溶剂组成，并添加增黏剂和降滤失剂以调整其性能。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条