1) bamboo plywood
竹胶板
1.
Experimental study on mechanical behavior of profiled steel sheet-bamboo plywood composite slabs;
压型钢板-竹胶板组合楼板的力学性能试验研究
2.
Construction techniques of high strength plastic-covered bamboo plywood form system;
高强覆塑镜面竹胶板木体系墙体模板施工技术
3.
Based on the full scale construction experiment research on split columns with gesso clapboard and with bamboo plywood,this paper discusses the construction technique of split columns,brings up the construction rules of split columns,concludes that gesso clapboard can not act as the clapboard of split columns without being strengthened in both sides,but bamboo plywood is perfect.
通过对分别以石膏板和竹胶板为隔板的分体柱足尺施工试验 ,探讨了分体柱的施工工艺 ,提出了分体柱的施工要求。
2) bamboo plywood form
竹胶板
1.
Problems about joint of bamboo plywood form and large steel formwork;
浅析竹胶板与大钢模拼接问题
2.
Construction scheme combined with the application of large formwork and bamboo plywood form;
大模板和竹胶板配合使用施工方案
3) bamboo plywood
竹胶合板
1.
Facing the coming of high cost period of bamboo plywood industry,authors indicate that a development way,guiding by high science and technology development,should be go,so that exterprises become stronger and stronger.
面对竹胶合板企业高成本时代的来临,指出了应该走以加强科技创新,以高科技进步为先导的发展道路,企业才能不断发展壮大,并就此提出了一些具体的措施,并进行了分析。
2.
This paper introduces the structural features and architectural characteristics of Nanhan residential building with the shop at the bottom, expounds the application of the large steel framework and bamboo plywood in this engineering and the construction technology scheme, and puts forward the quality standard of framework installation.
介绍了南寒底商住宅的结构特点和建筑特征,阐述了大钢模板和竹胶合板在该工程中的应用及其施工技术方案,并给出了模板安装的质量标准。
3.
Owing to the problems existed nowadays in architecture pattern process, the authors put forward the significance and design essence of complete set of bamboo plywood system in development and creation.
根据我国现行建筑模板工程中存在的问题，提出了开发和研制新型、成套的竹胶合板模板体系的重要意义和设计要点，并通过应用技术的成套研制和开发构思，指出了新型模板体系所应具有的全方位优势。
4) bamboo glue formwork
竹胶模板
1.
Design and construction of bamboo glue formwork of nanomelia shear wall structure;
短肢剪力墙结构竹胶模板的设计与施工
2.
Based on engineering case,construction technology of cast-in-situ exterior insulation board in bamboo glue formwork was introduced,including the structure of cast-in-situ exterior insulation board,technology measures and construction points.
结合工程实例,介绍了竹胶模板内置现浇外保温板的施工技术,从现浇外保温墙板构造、技术措施及施工要点等方面进行了论述,指出采用内置保温板现浇的外墙保温施工工艺,可缩短工期,降低成本。
3.
15 villa of International Art Exhibition Center in Nanjing applies herringbone arch roof,whose bottom adopts bamboo glue formwork to form bamboo stria fairfaced concrete as decorative surface.
南京佛手湖国际艺术会展中心15号别墅屋顶为人字形弧形屋面,建筑屋面底部设计采用竹胶模板形成竹蓆纹清水混凝土作为建筑物的装饰面层。
5) Plybamboo
竹胶合板
1.
Study on Creep Performance of Plybamboo Form;
竹胶合板模板蠕变特性研究
2.
The properties of plybamboo form are.
竹胶合板模板是以毛竹为原料，将其加工成竹席和竹帘，并以竹席为面层材料，以纵横交错组坯的竹帘为芯层材料，经干燥、浸胶、组坯、热压胶合而成一种竹材人造板。
6) laminated bamboo sheet
胶合竹板
1.
The failure of beams was caused by the delamination of laminated bamboo sheet or joint fracture in the mid-span zone.
提出了一种以胶合竹板为基本材料的现代竹结构人行桥梁,并通过3根足尺试件的试验,研究了短薄胶合竹板制成长梁的成型工艺和构件的力学性能。
补充资料：挡胶板
分子式：
CAS号：
性质：装设在开炼机或压延机喂料辊筒工作面两侧机架上，插在两个辊筒之间的空间，并与两辊面紧密接触的楔形挡板。工作时，使胶料保持在要求的辊面宽度范围内，阻挡堆积胶跑出辊面。挡胶板的材料通常采用酚醛塑料(夹布胶木)、铸型尼龙、青铜或硬木。
CAS号：
性质：装设在开炼机或压延机喂料辊筒工作面两侧机架上，插在两个辊筒之间的空间，并与两辊面紧密接触的楔形挡板。工作时，使胶料保持在要求的辊面宽度范围内，阻挡堆积胶跑出辊面。挡胶板的材料通常采用酚醛塑料(夹布胶木)、铸型尼龙、青铜或硬木。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条