1) PAE resin
PAE树脂
1.
In the paper PAE resin was modified by M and prepared four kinds of different PAE resins.
用改性剂M改性PAE树脂,制备了四组不同的PAE树脂,讨论了影响PAE树脂制备的因素,做了一系列的抄纸试验,通过对试验的分析确定了4#方案是最佳方案,其加入量为0。
2.
Polyamide-polyamine epichlorhydrin (PAE) resin was modified by modifier M and five different PAE resins were prepared.
用改性剂M改性聚酰胺多胺环氧氯丙烷(PAE)树脂,制备了五组不同的PAE树脂,做了一系列的抄纸试验。
2) PAE
PAE树脂
1.
Migration of PAE in Paper Drying;
PAE树脂在纸张干燥中的迁移
2.
The performance of cooking for the solidified PAE and the unbleached waste paper were discussed.
研究结果显示:利用蒸煮法通过改变纤维表面残留木素状态,能有效对利用PAE树脂增湿强处理的本色湿强废纸进行再制浆;在温度160℃,AQ用量0。
3) Polyaminamide Epichloro-hydrin Resin(PAE)
聚酰胺-环氧氯丙烷树脂(PAE)
4) resin
[英]['rezɪn] [美]['rɛzṇ]
树脂
1.
Study on adsorption dynamics of cephalosporin C in adsorption resin;
大孔吸附树脂对头孢菌素C的吸附动力学研究
2.
Study on adsorption of hexanal included in cyclohexanone with cation exchange resin;
树脂吸附环己酮中己醛的研究
3.
Application of Chemical Modification of Biomass in Resin Technology;
生物质化学改性在树脂化技术中的应用
5) pitch
[英][pɪtʃ] [美][pɪtʃ]
树脂
1.
In this paper,the properties of pitch and deposit in pulp were introduced,as well as its harm and the way of wet-end control,in order to provide theory support to the effective pitch control in the mills.
介绍了树脂及其沉积物的来源和种类、物理和化学特性、危害及其主要的湿部控制方法,为实际生产中解决树脂障碍提供了有效的理论基础。
2.
In order to evaluate the capability of lignin degradation and pitch elimination from Masson pine chips by nature white-rot fungi,20 white-rot fungus strains were obtained by petri dishes screening and petri dishes color-reaction screening.
为评价从野外筛选得到的白腐菌对造纸原料马尾松的木素降解和树脂脱除能力,将带菌样本经室内平板初筛及平板变色反应复筛,得到了20株纯白腐菌菌株,并对变色系数最小的一株菌株G进行松木片固体接种试验,测定3、5、7、9天后松木片的木素、树脂降解情况。
3.
The degradation rates of lignin and pitch were determined after 3 days,5 days,7 days and 9 days respectively.
测定经2种不同浓度无机盐稀释的菌悬液接种松木片3天、5天、7天、9天后的木素、树脂降解情况。
6) Colophony
[kə'lɔfəni]
树脂
1.
Use colophony to absorb and remove the organics in the industrial hydrogen peroxide ,then, add stabilizer to remove inorganic impurities, so the quality of product can reach the standard of electronic grade.
用工业双氧水先经树脂吸附脱去其中的有机物,再添加稳定剂除去无机杂质,生产的产品可达到电子级产品的标准。
补充资料：PAE
分子式：
CAS号：
性质：在体外或体内细菌与抗生素或抗菌药经短暂时间接触后，移去药物，其抑制细菌的作用仍能维持一段时间统称抗生素后效应。20世纪80年代以来，PAE试验被广泛应用于测定抗菌药物，作为药效学指标之一。PAE持续时间长短与细菌种类、药物浓度、两者接触时间长短、接种菌量和培养基成分等均有一定关系，PAE的作用机理目前仍不清楚，可能与细菌和药物接触后，细菌酶系统和代谢过程暂时受到抑制有关。
CAS号：
性质：在体外或体内细菌与抗生素或抗菌药经短暂时间接触后，移去药物，其抑制细菌的作用仍能维持一段时间统称抗生素后效应。20世纪80年代以来，PAE试验被广泛应用于测定抗菌药物，作为药效学指标之一。PAE持续时间长短与细菌种类、药物浓度、两者接触时间长短、接种菌量和培养基成分等均有一定关系，PAE的作用机理目前仍不清楚，可能与细菌和药物接触后，细菌酶系统和代谢过程暂时受到抑制有关。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条